Category: 6274-57-3

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 6274-57-3, name is 1-(4-Bromophenyl)-N,N-dimethylmethanamine, A new synthetic method of this compound is introduced below., Safety of 1-(4-Bromophenyl)-N,N-dimethylmethanamine

General procedure: At room temperature, organic carbonyl acid 3 (R-COOH, 0.5 mmol) was added into a reaction tube equipped with a small magnet. Then a solution of tertiary amine 1 (R1CH2-NR2R3, 0.5 mmol ) in DCM (2.5 mL) was added dropwise in 2 min. After the mixture was stirred at room temperature for a few minutes, 1 equivalents of dimethyl acetylenedicarboxylate (DMAD, 2) was added. The reaction was stirred overnight at room temperature, and then monitored by TLC with silica gel coated plates. After being stirred for 14 h, the solvent was removed and the residue was purified by a flash column chromatography with silica gel with ethyl acetate/hexane (1:25-30) as eluent to give the desired products 4, 5, and 7. Most of compounds are known and confirmed by NMR, ESI-MS, IR.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Shen, Hao; Lu, Xing; Jiang, Ke-Zhi; Yang, Ke-Fang; Lu, Yixin; Zheng, Zhan-Jiang; Lai, Guo-Qiao; Xu, Li-Wen; Tetrahedron; vol. 68; 43; (2012); p. 8916 – 8923;,
Bromide – Wikipedia,
bromide – Wiktionary

Reference of 6274-57-3, These common heterocyclic compound, 6274-57-3, name is 1-(4-Bromophenyl)-N,N-dimethylmethanamine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Magnesium strips (0.36 g, 15 mmol), a small amount of iodine, 4-bromo-N,N-dimethylbenzylamine (0.21 g, 1 mmol), tetrahydrofuran (25 mL) were added to a round bottom flask, and the mixture was heated to reflux. The reaction is initiated.A solution of 4-bromo-N,N-dimethylbenzylamine (2.98 g, 14 mmol) in THF (5 mL) was then added dropwise over 30 min.After the addition is completed, the reflux is continued for 2 hours.Then cooled to room temperature, and slowly added the compound a derived from amino acid within 30 min.(2-[(tert-Butoxycarbonyl)amino]-3-phenylpropanoic acid methyl ester) (1.40 g, 5 mmol) in THF (5 mL)The saturated ammonium chloride solution was quenched, extracted with ethyl acetate and washed with saturated brine.After drying over anhydrous sodium sulfate, a crude Boc-protected amino alcohol b was obtained, which was used directly in the next step.

The synthetic route of 6274-57-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; University of Science and Technology of China; Wang Zhiyong; Gui Yang; (28 pag.)CN108821995; (2018); A;,
Bromide – Wikipedia,
bromide – Wiktionary

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 6274-57-3, name is 1-(4-Bromophenyl)-N,N-dimethylmethanamine, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C9H12BrN

General procedure: At room temperature, organic carbonyl acid 3 (R-COOH, 0.5 mmol) was added into a reaction tube equipped with a small magnet. Then a solution of tertiary amine 1 (R1CH2-NR2R3, 0.5 mmol ) in DCM (2.5 mL) was added dropwise in 2 min. After the mixture was stirred at room temperature for a few minutes, 1 equivalents of dimethyl acetylenedicarboxylate (DMAD, 2) was added. The reaction was stirred overnight at room temperature, and then monitored by TLC with silica gel coated plates. After being stirred for 14 h, the solvent was removed and the residue was purified by a flash column chromatography with silica gel with ethyl acetate/hexane (1:25-30) as eluent to give the desired products 4, 5, and 7. Most of compounds are known and confirmed by NMR, ESI-MS, IR.

According to the analysis of related databases, 6274-57-3, the application of this compound in the production field has become more and more popular.

Reference:
Article; Shen, Hao; Lu, Xing; Jiang, Ke-Zhi; Yang, Ke-Fang; Lu, Yixin; Zheng, Zhan-Jiang; Lai, Guo-Qiao; Xu, Li-Wen; Tetrahedron; vol. 68; 43; (2012); p. 8916 – 8923;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 6274-57-3, name is 1-(4-Bromophenyl)-N,N-dimethylmethanamine, A new synthetic method of this compound is introduced below., Recommanded Product: 1-(4-Bromophenyl)-N,N-dimethylmethanamine

To a 1 L round bottom flask with a stir bar, reflux condenser and gas inlet containing [4-bromophenyl)methyl]dimethyl amine (55 mmol, 11.8 g) in glyme (300 mL) and water (30 mL) was added 3-aminophenyl boronic acid hydrate (110 mmol, 17g), (Ph3P)2PdCI2 (2.75 mmol, 1.93 g) and sodium carbonate (165 mmol, 17.5 g). The reaction was stirred at reflux under nitrogen until LC-MS analysis indicated consumption of starting material. The reaction mixture was partitioned between diethyl ether and water. The organic layer was washed with brine, dried (Na2SO4), filtered, and concentrated to give an oil. The oil was slurried in Et2O and acidified with 1N HCI in Et2O to give the HCI salt of the product as a precipitate (12 g, 73%). 1H NMR (300 MHz, DMSO-d6) delta ppm 8.15 (br s, 2H), 7.58 (d, 1 H, J = 7.3), 7.52 (d, 1H, J = 1.8), 7.34 (t, 1 H, J = 7.7), 7.22 (m, 2H)1 7.06 (m, 2H), 6.79 (d, 1H, J = 7.8), 4.32 (s, 2H), 2.73 (s, 6H)

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SMITHKLINE BEECHAM CORPORATION; WO2007/18941; (2007); A2;,
Bromide – Wikipedia,
bromide – Wiktionary

Electric Literature of 6274-57-3,Some common heterocyclic compound, 6274-57-3, name is 1-(4-Bromophenyl)-N,N-dimethylmethanamine, molecular formula is C9H12BrN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

a) 4-(4-Dimethylaminomethylphenyl)-4-hydroxycyclohexanone-ethylene ketal To a solution of 36.4 g (0.17 mol) of 4-bromo-N,N-dimethylbenzylamine in 250 ml of dry tetrahydrofuran, cooled to -70 C., are added dropwise, under a nitrogen atmosphere and with stirring, 112 ml (0.179 mol) of a 1.6 molar solution of n-butyllithium in hexane in such a way that the temperature does not exceed -65 C. The orange solution is stirred for a further 15 minutes at -70 C. and then within 10 minutes a solution of 27.6 g (0.172 mol) of 1,4-cyclohexanedione-monoethylene ketal in 110 ml of tetrahydrofuran is added, whilst the temperature must not exceed -65 C. The reaction mixture is stirred first for 30 minutes at -70 C. and then without external cooling until a temperature of +20 C. is reached, then poured into 600 ml of ice water and extracted with 200 ml of ethyl acetate. The organic phase is separated off and the aqueous phase is extracted several times with ethyl acetate. The combined organic extracts are dried with sodium sulphate, evaporated down in vacuo and the residue remaining is recrystallized from diisopropylether. 41.9 g (85% of theory) of 4-(4-dimethylaminomethylphenyl)-4-hydroxycyclohexanone-ethylene ketal are obtained, m.p. 84-86 C.

The synthetic route of 6274-57-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Karl Thomae GmbH; US5726205; (1998); A;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 6274-57-3, name is 1-(4-Bromophenyl)-N,N-dimethylmethanamine, A new synthetic method of this compound is introduced below., HPLC of Formula: C9H12BrN

General procedure: To a stirred solution of 10 (1.00g, 4.00mmol) and K2CO3 (1.66g, 12.00mmol) in acetonitrile (20mL) was added dropwise diethylamine solution (1.20g, 16.00mmol) at room temperature for 2h. The solvent was evaporated in vacuo and the residue was then dissolved in EtOAc (50mL) and washed with water (20mL×3), the organic layers were washed with brine, and dried over anhydrous Na2SO4. The solvent was evaporated under reduced pressure to provide the 11a (0.83g, 84.7% yield) as an off-white liquid. (0041) Then, a mixture of 11a (0.83g, 3.43mmol), bis(pinacolato)diboron (0.96g, 3.77mmol), PdCl2(dppf)-CH2Cl2 (0.084g, 0.103mmol) and potassium acetate (0.67g, 6.86mmol) in anhydrous 1,4-dioxane (15mL) was purged with argon and heated at 100C for 2.5h. The reaction was then treated with 6 (1.20g, 3.60mmol), 2.0M aqueous Na2CO3 (5mL) and another portion of PdCl2(dppf)-CH2Cl2 (0.084g, 0.103mmol), then heated at 110C for 12h under argon. The reaction mixture was cooled to room temperature, filtered, and concentrated. The final compound was purified by MPLC (ISCO CombiFlash purification system) (MeOH/DCM, eluted from 0% to 10%), The fractions were collected, concentrated to afford 12a (0.72g, 57.2% yield).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Han, Jinsong; Chen, Ying; Yang, Chao; Liu, Ting; Wang, Mingping; Xu, Haojie; Zhang, Ling; Zheng, Canhui; Song, Yunlong; Zhu, Ju; European Journal of Medicinal Chemistry; vol. 122; (2016); p. 684 – 701;,
Bromide – Wikipedia,
bromide – Wiktionary

Application of 6274-57-3,Some common heterocyclic compound, 6274-57-3, name is 1-(4-Bromophenyl)-N,N-dimethylmethanamine, molecular formula is C9H12BrN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: At room temperature, organic carbonyl acid 3 (R-COOH, 0.5 mmol) was added into a reaction tube equipped with a small magnet. Then a solution of tertiary amine 1 (R1CH2-NR2R3, 0.5 mmol ) in DCM (2.5 mL) was added dropwise in 2 min. After the mixture was stirred at room temperature for a few minutes, 1 equivalents of dimethyl acetylenedicarboxylate (DMAD, 2) was added. The reaction was stirred overnight at room temperature, and then monitored by TLC with silica gel coated plates. After being stirred for 14 h, the solvent was removed and the residue was purified by a flash column chromatography with silica gel with ethyl acetate/hexane (1:25-30) as eluent to give the desired products 4, 5, and 7. Most of compounds are known and confirmed by NMR, ESI-MS, IR.

The synthetic route of 6274-57-3 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Shen, Hao; Lu, Xing; Jiang, Ke-Zhi; Yang, Ke-Fang; Lu, Yixin; Zheng, Zhan-Jiang; Lai, Guo-Qiao; Xu, Li-Wen; Tetrahedron; vol. 68; 43; (2012); p. 8916 – 8923;,
Bromide – Wikipedia,
bromide – Wiktionary

Reference of 6274-57-3, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 6274-57-3 as follows.

a.; A solution of (4-bromobenzyl)dimethylarnine (120 g, 0.50 mole) in THF (2 L) was cooled to -78 0C and treated dropwise with n-BuLi (47 g, 0.728 mole). The reaction mixture was stirred for 1 hour and then butyl borate (194 g, 0.84 mole) was added dropwise. The reaction mixture was stirred for 1 hour, allowed to warm to 0 0C, and then quenched by the addition of water (1.5 L). The reaction mixture was washed with ether (2 x 1 L), and the aqueous layer taken on to the next step.

According to the analysis of related databases, 6274-57-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SMITHKLINE BEECHAM CORPORATION; WO2007/18941; (2007); A2;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 6274-57-3, name is 1-(4-Bromophenyl)-N,N-dimethylmethanamine, A new synthetic method of this compound is introduced below., SDS of cas: 6274-57-3

To a solution of (4-bromophenyl)-N,N-dimethylmethanamine (4.26 g, 20.00 mmol, 1.00 equiv) in tetrahydrofuran (60 mL) maintained under nitrogen at -78C was added in 30 min a 2.5M solution of n-butyllithium (8.8 mL, 1.10 equiv) in hexane dropwise with stirring. The resulting solution was stirred at -78C for 2 h. Sulfur dioxide gas was then bubbled into the solution at -78C for 1 h. Ether (200 mL) was added and the precipitate was collected by filtration. The solid was washed with ether and dried in vacuum to give 4 g (98%) of lithium 4-((dimethylamino)methyl)benzenesulfinate as a yellow solid.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; THE BOARD OF TRUSTEES OF THE LELAND STANFORD JUNIOR UNIVERSITY; AUCKLAND UNISERVICES LIMITED; RUGA CORPORATION; GIACCA, Amato; LAI, Edwin; RAZORENOVA, Olga; CHAN, Denise; HAY, Michael, Patrick; BONNET, Muriel; SUN, Connie; TABIBIAZAR, Ray; YUEN, Po-wai; WO2013/155338; (2013); A2;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 6274-57-3, A common heterocyclic compound, 6274-57-3, name is 1-(4-Bromophenyl)-N,N-dimethylmethanamine, molecular formula is C9H12BrN, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Pd(PPh3)4 (3 mol%) was added to a suspension of the appropriate benzoxazole 7 and (het)aryl bromide (1 equiv) in 1 M aq K2CO3 (3equiv) and 1,4-dioxane (0.15 M) at r.t. The mixture was stirred at reflux for 2 h then cooled to r.t. H2O was added, and the mixture was extracted with EtOAc. The organic layers were combined, washed with brine, dried (NaSO4), filtered, and concentrated in vacuo. The residue was purified by column chromatography (silica gel,hexane-EtOAc or CHCl3-MeOH).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Fukaya, Takayuki; Masumoto, Shuji; Synthesis; vol. 45; 23; (2013); p. 3269 – 3275;,
Bromide – Wikipedia,
bromide – Wiktionary