Category: 40161-54-4

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 40161-54-4, name is 1-Bromo-2-fluoro-4-(trifluoromethyl)benzene belongs to bromides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. category: bromides-buliding-blocks

To a solution of 4-bromo-3-fluoro-benzotrifluoride (585 mg, 2.36 mmol) in 15 mL of THF, stirred at -75 C. under nitrogen atmosphere, 1.53 mL (2.6 mmol) of a 1.7M solution of tert-butyllithium in pentane were added dropwise. The reaction mixture was stirred at -60 C. for 15 minutes then a solution of 2-methyl-propane-2-sulfinic acid-(tetrahydro-pyran-4-ylidene)-amide (400 mg, 1.97 mmol; prepared as described in literature: WO2005/87751 A2) in 10 mL of THF was added dropwise. The reaction mixture was allowed to reach room temperature and stirred for 1 hr. A saturated ammonium chloride solution was added and the reaction mixtures was extracted with ethyl acetate. The organic phases were collected, dried over sodium sulfate and concentrated under vacuum. The crude obtained was purified by flash chromatography (eluent: cyclohexane/AcOEt; gradient from 12% to 100% of AcOEt). The oil obtained was diluted in 2 mL of 1,4-dioxane, 0.4 mL of a 4 M solution of hydrochloric acid in 1,4-dioxane were added, the reaction mixture was stirred at room temperature for 1 hr and then concentrated under vacuum to obtain 100 mg of the title compound as white solid.LC-MS (Method 2): Rt=0.90 minMS (ESI pos): m/z=264 (M+H)+

The synthetic route of 40161-54-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Boehringer Ingelheim International GmbH; HOENKE, Christoph; BERTANI, Barbara; FERRARA, Marco; FOSSATI, Giacomo; FRATTINI, Sara; GIOVANNINI, Riccardo; HOBSON, Scott; (88 pag.)US2017/101411; (2017); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

These common heterocyclic compound, 40161-54-4, name is 1-Bromo-2-fluoro-4-(trifluoromethyl)benzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. category: bromides-buliding-blocks

3.6-Dihydro-2H-pyran-4-boronic acid pinacol ester (5.62 g, 26.75 mmol), 4-bromo-3-fluorobenzotrifluoride (5.00 g, 20.58 mmol), potassium carbonate (8.53 g, 61.73 mmol) and 1,1?-bis(diphenylphosphino)ferrocenedichloro palladium(II) (753 mg, 1.03 mmol) were suspended in 50 mL of 1,4-dioxane and 10 mL of water. The reaction mixture was refluxed for 3 hrs, solvents were evaporated and the crude was extracted with ethyl acetate (50 mL) and water (50 mL). Organic layer was separated, dried over sodium sulfate and evaporated. The crude obtained was purified by flash chromatography (eluent: cyclohexane/AcOEt; gradient from 40% to 100% of AcOEt) to obtain 4.0 g of the title compound as clear oil.GC-MS (Method 9): Rt=7.76 minMS: m/z=246 (M)+

The synthetic route of 1-Bromo-2-fluoro-4-(trifluoromethyl)benzene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Boehringer Ingelheim International GmbH; HOENKE, Christoph; BERTANI, Barbara; FERRARA, Marco; FOSSATI, Giacomo; FRATTINI, Sara; GIOVANNINI, Riccardo; HOBSON, Scott; (88 pag.)US2017/101411; (2017); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Related Products of 40161-54-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 40161-54-4, name is 1-Bromo-2-fluoro-4-(trifluoromethyl)benzene belongs to bromides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Intermediate G: 4-(2-Bromo-5-(trifluoromethyl)phenyl)morpholine A microwave vial charged with potassium phosphate (0.533 g, 2.51 mmol), 1- bromo-2-fluoro-4-(trifluoromethyl)benzene (0.610 g, 2.51 mmol) and 1 mL dioxane, was treated with morpholine (0.437 ml, 5.02 mmol) and was heated to 150C in a microwave reactor for one hour. LC/MS showed mostly starting material, so the reaction mixture was treated with 1 mL DMF and was heated to 150 C in an oil bath overnight. LC/MS showed product, so the reaction mixture was diluted with DCM, filtered through a syringe filter, and concentrated. Purification of the resulting residue by silica gel column chromatography (0 to 50% EtO Ac/heptane) gave 4-(2-bromo-5- (trifluoromethyl)phenyl)morpholine (0.280 g, 0.903 mmol) as a clear oil. [M+H]+ = 312.0

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Bromo-2-fluoro-4-(trifluoromethyl)benzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; AMGEN INC.; DINEEN, Thomas; KREIMAN, Charles; WEISS, Matthew; GEUNS-MEYER, Stephanie; WO2013/134518; (2013); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Application of 40161-54-4, A common heterocyclic compound, 40161-54-4, name is 1-Bromo-2-fluoro-4-(trifluoromethyl)benzene, molecular formula is C7H3BrF4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 43: N-(5-Fluorothiazol-2-yl)-5-(2-(5-methyl-lH-imidazol-l-yl)-4- (trifluoromethyl)phenyl)-3,4-dihydroisoquinoline-2(lH)-sulfonamide Step 1 : l-(2-Bromo-5-(trifluoromethyl)phenyl)-5-methyl-lH-imidazole A solution of 4-methyl-lH-imidazole (1.352 g, 16.46 mmol) in 20 mL THF was treated with lithium tert-butoxide IN in hexane (16.46 ml, 16.46 mmol) and was allowed to stir for one hour. The reaction mixture was concentrated and then transferred to a microwave vial charged with l-bromo-2-fluoro-4-(trifluoromethyl)benzene (2.360 ml, 16.46 mmol) and 10 mL dioxane. The reaction mixture was heated to 180 C in a microwave reactor for one hour. After cooling to room temperature, the reaction mixture was poured into saturated NH4CI solution and was extracted with DCM. The organics were concentrated, then purified directly by silica gel column chromatography (0 to 50% EtO Ac/heptane) yielding l-(2- bromo-5-(trifluoromethyl)phenyl)-5-methyl-lH-imidazole (0.710 g, 2.327 mmol).

The synthetic route of 40161-54-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; AMGEN INC.; DINEEN, Thomas; KREIMAN, Charles; WEISS, Matthew; GEUNS-MEYER, Stephanie; WO2013/134518; (2013); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Some common heterocyclic compound, 40161-54-4, name is 1-Bromo-2-fluoro-4-(trifluoromethyl)benzene, molecular formula is C7H3BrF4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application In Synthesis of 1-Bromo-2-fluoro-4-(trifluoromethyl)benzene

Reference Example 54 1-[2-fluoro-4-(trifluoromethyl)phenyl]pyrrolidin-3-ol; A solution of 1-bromo-2-fluoro-4-(trifluoromethyl)benzene (4.6 g), 3-hydroxypyrrolidine (1.5 g), palladium(II) acetate (137 mg), (+/-)-2,2′-bis(diphenylphosphino)-1,1′-binaphthyl (1.07 g) and cesium carbonate (16.8 g) in toluene (90 mL) was stirred under an argon gas atmosphere at 85C for 16 hr. After cooling to room temperature, water was added to the reaction mixture, and the mixture was extracted with ethyl acetate. The organic layer was washed with saturated brine, dried over anhydrous magnesium sulfate, and filtered. The filtrate was concentrated, and the residue was purified by silica gel column chromatography (hexane/ethyl acetate 90:10 – 65:35) to give the title compound (2.82 g, yield 66%) as a gray solid. 1H-NMR (300 MHz, CDCl3) delta:1.63 (d, J = 4.5 Hz, 1 H), 1.96 – 2.22 (m, 2 H), 3.40 – 3.57 (m, 2 H), 3.61 – 3.81 (m, 2 H), 4.51 – 4.66 (m, 1 H), 6.64 (t, J = 9.1 Hz, 1 H), 7.15 – 7.25 (m, 2 H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 40161-54-4, its application will become more common.

Reference:
Patent; Takeda Pharmaceutical Company Limited; EP2295406; (2011); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 40161-54-4, name is 1-Bromo-2-fluoro-4-(trifluoromethyl)benzene, A new synthetic method of this compound is introduced below., Computed Properties of C7H3BrF4

Example 41 : N-(5-Fluorothiazol-2-yl)-5-(2-(4-methylpiperazin-l-yl)-4- (trifluoromethyl)phenyl)-3,4-dihydroisoquinoline-2(lH)-sulfonamide Step 1 : tert-Butyl 5-(2-(4-methylpiperazin-l-yl)-4-(trifluoromethyl)phenyl)-3,4- dihydroisoquinoline-2(lH)-carboxylate A microwave vial charged with 1 -methylpiperazine (2.74 ml, 24.69 mmol) and 1- bromo-2-fluoro-4-(trifluoromethyl)benzene (2.000 g, 8.23 mmol) was heated to 180 C in a microwave reactor for 90 minutes. The reaction mixture was concentrated then transferred to a vial charged with Cl2Pd(AmPhos) (Sigma- Aldrich, St. Louis, MO, 0.291 g, 0.412 mmol), tert-butyl 5-(4,4,5,5-tetramethyl-l,3,2-dioxaborolan-2-yl)-3,4-dihydroisoquinoline-2(lH)- carboxylate (ASW Medchem, Brunswick, NJ, 2.96 g, 8.23 mmol), and potassium phosphate (8.74 g, 41.2 mmol). 8 mL dioxane and 4 mL water were added, and the reaction mixture was heated to 120 C for 2 hours. After cooling to rt, the reaction mixture was poured into water and extracted with DCM. The organics were concentrated then purified by reverse phase column chromatography [RediSep Gold CI 8 150g, 15 to 100% (0.1% NH4OH in MeOH)/(0.1% NH4OH in water)] yielding tert-butyl 5-(2-(4-methylpiperazin-l-yl)-4- (trifluoromethyl)phenyl)-3,4-dihydroisoquinoline-2(lH)-carboxylate (1.68g, 3.53 mmol).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; AMGEN INC.; DINEEN, Thomas; KREIMAN, Charles; WEISS, Matthew; GEUNS-MEYER, Stephanie; WO2013/134518; (2013); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Related Products of 40161-54-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 40161-54-4, name is 1-Bromo-2-fluoro-4-(trifluoromethyl)benzene belongs to bromides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

(Step 3) Synthesis of 2-(2-fluoro-4-(trifluoromethyl)phenyl)-1-methyl-5-(4-(trifluoromethypplicnyl)-1H-imidazole 3-oxide (Compound 1-5) 1.0 g (4.1 mmol, 1.1 eq) of 1-methyl-5-(4-(trifluoromethyl)phenyl)-1H-imidazole 3-oxide, 0.043 g (0.19 mmol, 5 mol %) of palladium acetate, 0.18 g (0.57 mol, 15 mol %) of tri(p-fluorophenyl)phosphine, 0.11 g (1.1 mmol, 30 mol %) of pivalic acid, and 1.0 g (7.4 mmol, 2.0 eq) of carbonic acid potassium were added to a reactor, followed by replacing the air with argon gas. 14 mol of anhydrous acetonitrile solution of 0.90 g (3.7 mmol, 1.0 eq) of 4-bromo-3-fluorobenzene trifluoride was added to the resulting mixture, followed by stirring over night at 70 C. The resulting reaction liquid was filtered over celite and concentrated under reduced pressure. The obtained crude crystal was washed with diethylether to obtain 1.1 g of the objective compound (yield: 73%). 1H-NMR of the obtained compound is shown below: 1H-NMR (400 MHz, CDCl3): delta 8.21(m, 1H), 7.80(m, 2H), 7.64(m, 111), 7.59(m, 2H), 7.57(m, 1H), 7.47(s, 1H), 3.57(d, 3H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Bromo-2-fluoro-4-(trifluoromethyl)benzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Nippon Soda Co., Ltd.; AOYAMA, Hikaru; MATSUI, Maki; IWASA, Takao; FUJII, Kazushige; KOBAYASHI, Tomomi; SAKANISHI, Keita; (32 pag.)US2017/223958; (2017); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 40161-54-4, These common heterocyclic compound, 40161-54-4, name is 1-Bromo-2-fluoro-4-(trifluoromethyl)benzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

(1) 1-[2-Fluoro-4-(trifluoromethyl)phenyl]butan-1-one To a solution of 1-bromo-2-fluoro-4-(trifluoromethyl)benzene (0.30mL, 2.1mmol) in THF (6mL) was added dropwise 1.5M butyllithium in THF (1.65 mL) at -78C. The mixture was stirred at -78C for 15 minutes, to which was added a solution of butyraldehyde (0.18 mL, 2.5 mmol) in THF (2 ml) at -78C. After stirring at -78C for 30 minutes, the mixture was treated with acetic acid (1 mL)/THF (2 mL), and then followed by water at room temperature. The organic layer was separated, and the aqueous layer was extracted with ether. The combined organic layers were washed with saturated brine. After drying over anhydrous sodium sulfate, the solvent was removed under reduced pressure to give 1-[2-fluoro-4-(trifluoromethyl)-phenyl]butanol.

Statistics shows that 1-Bromo-2-fluoro-4-(trifluoromethyl)benzene is playing an increasingly important role. we look forward to future research findings about 40161-54-4.

Reference:
Patent; Nippon Chemiphar Co., Ltd.; EP2277874; (2011); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 40161-54-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 40161-54-4, name is 1-Bromo-2-fluoro-4-(trifluoromethyl)benzene belongs to bromides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

A mixture of 1.5 g of 4-bromo-3-fluorobenzotrifluoride, 0.46 ml of ethanethiol, 851 mg of potassium carbonate and 2 ml of DMF was stirred at 75C for 2.5 hours. Water was poured to the cooled reaction mixture, and the mixture was extracted with t-butyl methyl ether. The organic layer was washed with water, dried over anhydrous magnesium sulfate and then concentrated under reduced pressure. The resulting residue was applied to a silica gel column chromatography to obtain 1.15 g of 4-bromo-3-ethylsulfanylbenzotrifluoride. 4-Bromo-3-ethylsulfanylbenzotrifluoride 1H-NMR(CDCl3) delta: 7.65(1H, d), 7.38(1H, d), 7.26-7.22(1H, m), 3.01(2H, q), 1.41(3H, t).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Bromo-2-fluoro-4-(trifluoromethyl)benzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Sumitomo Chemical Co., Ltd; TAKAHASHI, Masaki; ITO, Mai; NOKURA, Yoshihiko; TANABE, Takamasa; SHIMIZU, Chie; EP2862853; (2015); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 40161-54-4, The chemical industry reduces the impact on the environment during synthesis 40161-54-4, name is 1-Bromo-2-fluoro-4-(trifluoromethyl)benzene, I believe this compound will play a more active role in future production and life.

To a mixture of l-bromo-2-fluoro-4-(trifluoromethyl)benzene (5.0 g, 0.02 mol) in EtOH (10 mL) was added Pd(dppf)Ci2 (1.46 g, 0.2 mmol ) and AcONa (3.37 g, 0.041 mol), and the resulting mixture was stirred at 80 C under an atmosphere of CO (50 psi) for 8 hours. The mixture was then filtrated and the filtrate was partitioned with ethyl acetate and water. The aqueous layer was separated and extracted with ethyl acetate twice. The combined organic layers were washed with brine, dried over anhydrous Na2S04 and concentrated in vacuo. The resulting residue was purified by column chromatography on silica gel (eluting with PE_EA=10: 1) to give the title compound. NMR (400MHz, CDC13) & 8.04-8.08 (t, 1H, J= 7.6 Hz), 7.49-7.47 (d, 1H, J = 8.0 Hz), 7.43-7.40 (d, 1H, J= 10.4 Hz), 4.44-4.40 (q, 2H, J= 7.2 Hz), 1.43-1.38 (t, 3H, J= 7.2 Hz).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Bromo-2-fluoro-4-(trifluoromethyl)benzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; MERCK SHARP & DOHME CORP.; BIFTU, Tesfaye; COLLETTI, Steven L.; HAGMANN, William K.; KAR, Nam Fung; JOSIEN, Hubert; NAIR, Anilkumar; NARGUND, Ravi; BIJU, Purakkattle; ZHU, Cheng; HU, Bin; WO2015/51496; (2015); A1;,
Bromide – Wikipedia,
bromide – Wiktionary