Category: 3972-64-3

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 3972-64-3, name is 1-Bromo-3-(tert-butyl)benzene, A new synthetic method of this compound is introduced below., Application In Synthesis of 1-Bromo-3-(tert-butyl)benzene

A 1.6M solution of”butyllithium (1.7 mL, 2.72 mmol) was added to a solution of dicyclohexylamine (0.52 mL, 2.61 mmol) in toluene (10 mL). After stirring for 5 min, a mixture of cisltrans isomers of 4-methyl-cyclohexanecarboxylic acid methyl ester (342 mg, 2.19 mmol) was added. After stirring for 10 min, 1-bromo-3-tert- butyl-benzene (428 mg, 2.01 mmol) and bis (tri-tert-butylphosphine) palladium (0) (52 mg, 102 umol) was sequentially added. After stirring for 20 h, the solution was diluted with 10percent aqueous hydrochloric acid, and extracted with diethyl ether. The combined organic extracts were dried over magnesium sulfate, filtered, and concentrated. The residue was flash chromatographed with 49: 1,24 : 1, and 23: 2 hexanes: ethyl acetate as the eluant to yield 484 mg (84percent yield) of a mixture of cisltrans isomers of 1- (3-tert-butyl-phenyl)-4-methyl-cyclohexanecarboxylic acid methyl ester as a light yellow oil. 1H NMR (300 MHz, CDC13) b 7.51 and 7.40 (t and m, J=1.9 Hz, 1H), 7.33-7. 13 (m, 3 H), 3.65 (s, 3 H), 2.62 (m, 2H), 1.77-1. 02 (broad m, 7 H), 1.30 (s, 9H), 0.91 (d, J=6.5 Hz, 3 H).

The synthetic route of 3972-64-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ELAN PHARMACEUTICALS, INC.; WO2005/87751; (2005); A2;,
Bromide – Wikipedia,
bromide – Wiktionary

Application of 3972-64-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3972-64-3, name is 1-Bromo-3-(tert-butyl)benzene belongs to bromides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

1-bromo-3-(tertbutyl)benzene (300 mg, 1.41 mmol) was dissolved in dry THF (5 mL) at -78 C under nitrogen and was stirred for 10 min. n-BuLi (2.5 M in hexanes, 2.0 mL, 4.9 mmol) was added drop wiseto the solution was stirred for 2 h at -78 C. After two hours, ethyl fluoroacetate (0.16 mL, 1.69mmol) was added drop wise and stirred for 1 min at -78 C upon which the mixture was then quenched with NH4Cl (20 mL) and warmed to room temp. The mixture was then extracted withether (50 mL), and dried over MgSO4. After concentration in vacuo (note: remove shortly afterthe ether is removed, because the compound is quite volatile), the residue was purified with flash chromatography over silica gel (hexane: ethyl acetate = 90:10) to yield the product as a yellowliquid in 43percent yield (0.12 g).

The synthetic route of 1-Bromo-3-(tert-butyl)benzene has been constantly updated, and we look forward to future research findings.

Reference:
Article; Camerino, Eugene; Wong, Dawn M.; Tong, Fan; Koerber, Florian; Gross, Aaron D.; Islam, Rafique; Viayna, Elisabet; Mutunga, James M.; Li, Jianyong; Totrov, Maxim M.; Bloomquist, Jeffrey R.; Carlier, Paul R.; Bioorganic and Medicinal Chemistry Letters; vol. 25; 20; (2015); p. 4405 – 4411;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 3972-64-3, name is 1-Bromo-3-(tert-butyl)benzene, A new synthetic method of this compound is introduced below., HPLC of Formula: C10H13Br

In a IL three-necked round-bottom flask equipped with a mechanical stirrer and a reflux condenser were introduced DMF (20OmL), l-bromo-3-tert-butylbenzene (54.3g, 0.25mol), crotyl alcohol (65mL, 0.76mol, 3eq), sodium carbonate (66.2g, 0.62mol, 2.5eq), tetrabutyl ammonium bromide (69.5g, 0.25mol, leq), palladium acetate (5.05g, 7.5mmol, 3molpercent) and tri-o-tolyl phosphine (7.6g, 25mmol, O.leq). After stirring for Ih at 90- 1000C, the reaction mixture was cooled toambient temperature. The reaction mixture was filtered over celite. The organic phase thus obtained was diluted with MTBE (50OmL) and washed three times with water (50OmL portions), dried over magnesium sulphate and concentrated. The resulting crude product was distilled with a bulb-to-bulb distillation (3mBar, 1210C) to give a colourless oil (34.7g, gc purity 73percent). The crude product was chromatographed on a silica gel column with 5percent EtOAc in hexane as elution agent giving 3-(3-fert-butylrhohenyl)butanal (12.3g, gc purity 99percent; yield 39percent).Odour: floral, aldehydic, muguet, marine.Analytical data: EPO 1H NMR (400 MHz, CHLOROFORM-d) ppm: 1.33 (d, 3H, J=5.86 Hz); 1.32 (s, 9H); 2.61-2.80 (m, 2H); 3.36 (qt, IH, J=7.16, 6.96 Hz); 7.01-7.07 (m, IH); 7.23-7.27 (m, 3H); 9.72 (t, IH, /=2.08 Hz).13C NMR (101 MHz, CHLOROFORM-^) ppm: 22.15 (q, 1C); 31.35 (q, 3C); 34.53 (d, 1C); 34.66 (s, 1C); 51.83 (t, 1C); 123.49 (d, 1C); 123.55 (d, 1C); 123.91 (d, 1C); 128.30 (d, 1C); 145.06 (s, 1C); 151.48 (s, 1C); 202.04 (d, 1C).MS: m/z (relative intensity) 204 (M+, 12), 189 (31), 171 (4), 161 (30), 147 (100), 145 (81), 130 (17), 119 (24), 117 (23), 115 (21), 105 (25), 91 (36), 77 (14), 65 (8), 57 (52), 41 (31).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; QUEST INTERNATIONAL SERVICES B.V.; WO2008/53148; (2008); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Related Products of 3972-64-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3972-64-3, name is 1-Bromo-3-(tert-butyl)benzene belongs to bromides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

A 1.6M solution of”butyllithium (0.85 mL, 1. 36 mmol) was added to a solution of dicyclohexylamine (0. 27 mL, 1.36 mmol) in toluene (5 mL). After stirring for 5 min, a mixture of cisltrans isomers of 2-methyl-cyclohexanecarboxylic acid 2-trimethylsilanyl-ethyl ester (269 mg, 1.11 mmol) was added. After stirring for 30 min, 1-bromo-3-ferf-butyl-benzene (248 mg, 1.16 mmo 1) was added followed by the simultaneous addition of tri-tert-butylphosphonium tetrafluoroborate (31 mg, 107 umol) and tris (dibenzylideneacetone) dipalladium (0)-chloroform adduct (51 mg, 49.3 umol). The solution was placed into a preheated oil bath at 60 C. After stirring for 20 h, the solution was diluted with 10percent aqueous hydrochloric acid, and extracted with diethyl ether. The combined organic extracts were dried over magnesium sulfate, filtered, and concentrated. The residue was flash chromatographed with 49: 1,24 : 1, and 23: 2 hexanes: ethyl acetate as the eluant to yield 375 mg (90percent yield) of a mixture of cisltrans isomers of 1-(3-feff-butyl-phenyl)-2-methyl-cyclohexanecarboxylic acid 2-trimethylsilanyl-ethyl ester as a yellow oil. Method [2] Retention time 3.67 min by HPLC and 3.75 min by MS (M+Na=397). Method [2] Retention time 3.77 min by HPLC and 3.85 min by MS (M+Na=397).

The synthetic route of 1-Bromo-3-(tert-butyl)benzene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ELAN PHARMACEUTICALS, INC.; WO2005/87752; (2005); A2;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 3972-64-3, name is 1-Bromo-3-(tert-butyl)benzene, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 3972-64-3, Product Details of 3972-64-3

A 1. 6 M solution of nbutyllithium (12.0 mL, 19.2 mmol) was added to a solution of dicyclohexylamine (3.7 mL, 18.6 mmol) in toluene (40 mL). After stirring for 5 min, 3-methylene-cyclohexanecarboxylic acid 2-trimethylsilanyl-ethyl ester (3.45 g, 14.4 mmol) was added. After stirring for 30 min, 1-bromo-3-tert-butyl- benzene (3.16 g, 14.8 mmol) was added followed by the simultaneous addition of tri-teff-butylphosphonium tetrafluoroborate (220 mg, 758, umol) and tris (dibenzylideneacetone) dipalladium (O)-chloroform adduct (380 mg, 367, umol). The solution was placed into a preheated oil bath at 60 °C. After stirring for 16 h, the solution was directly flash chromatographed with 99: 1,49 : 1,24 : 1, and 23: 2 hexanes/ethyl acetate as the eluant to yield 4.31 g (81 percent yield) of 1- (3-tert-butyl- phenyl)-3-methylene-cyclohexanecarboxylic acid 2-trimethylsilanyl-ethyl ester as a light yellow oil.’H NMR (300 MHz, CDCl3) ; 6 7. 43 (d, J=1.0 Hz, 1 H), 7.25 (m, 3H), 4. 82 (s, 1 H), 4. 78 (s, 1H), 4.12 (m, 2H), 3.06 (d, J=13. 3 Hz, 1H), 2.52 (d, J=13. 3 Hz, 2H), 2.26 (dt, J=13.1 Hz and 4.5 Hz, 1H), 2.05 (m, 1H), 1.88-1. 59 (broad m, 3H), 1.31 (s, 9H), 0.89 (m, 2H),-0. 04 (s, 9H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Bromo-3-(tert-butyl)benzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ELAN PHARMACEUTICALS, INC.; WO2005/87215; (2005); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Application of 3972-64-3, A common heterocyclic compound, 3972-64-3, name is 1-Bromo-3-(tert-butyl)benzene, molecular formula is C10H13Br, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A 1. 6 M solution of”butyllithium (0.85 mL, 1.36 mmol) was added to a solution of dicyclohexylamine (0.27 mL, 1.36 mmol) in toluene (5 mL). After stirring for 5 min, a mixture of cisltrans isomers of 3-methyl-cyclohexanecarboxylic acid 2- trimethylsilanyl-ethyl ester (269 mg, 1.11 mmol) was added. After stirring for 30 min, 1-bromo-3-tert-butyl-benzene (250 mg, 1.17 mmol) was added followed by the simultaneous addition of tri-tert-butylphosphonium tetrafluoroborate (31 mg, 107 pmol) and tris (dibenzylideneacetone) dipalladium (0)-chloroform adduct (54 mg, 52.2 pmol). The solution was placed into a preheated oil bath at 60 °C. After stirring for 20 h, the solution was diluted with 10percent aqueous hydrochloric acid, and extracted with diethyl ether. The combined organic extracts were dried over magnesium sulfate, filtered, and concentrated. The residue was flash chromatographed with 49: 1,24 : 1, and 23: 2 hexanes: ethyl acetate as the eluant to yield 250 mg (62percent yield) of a mixture of cisltrans isomers of 1- (3-tert-butyl-phenyl)- 3-methyl-cyclohexanecarboxylic acid 2-trimethylsilanyl-ethyl ester as a yellow oil. Method [2] Retention time 3.64 min by HPLC and 3.68 min by MS (M+Na=397).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ELAN PHARMACEUTICALS, INC.; WO2005/70407; (2005); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 3972-64-3, name is 1-Bromo-3-(tert-butyl)benzene, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 3972-64-3, Formula: C10H13Br

Step 1: Synthesis of 3-tert-butylphenylboronic acid To a solution of dry THF (10 mL) was added magnesium (1.25 g, 52 mmol), 3-t-butyl bromobenzene (2.0 g, 9.4 mmol) and a crystal of iodine. The reaction was first heated slightly until the reaction started and then removed. The remaining 3-t-butyl bromobenzene (8.0 g, 37.7 mmol) was added via an addition funnel until the spontaneous refluxing stopped. The reaction mixture was heated to reflux for 2 hours. The Grignard was transferred via a syringe into a cooled solution (-40° C.) of trimethyl borate dissolved in THF and added over a 10 minute period. The reaction mixture was warmed to room temperature overnight. Ethyl acetate and distilled water were added to the reaction mixture and the layers separated. The organics were washed with brine and dried over magnesium sulfate. The solvent was concentrated and the product purified by a silica gel column using 10percent ethyl acetate and hexanes as the eluants to give 3-t-butylphenyl boronic acid (4.0 g, 46percent yield) as a white solid. The product was confirmed by GCMS and was used directly in the next step.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Bromo-3-(tert-butyl)benzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Universal Display Corporation; EP2243785; (2010); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Application of 3972-64-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3972-64-3, name is 1-Bromo-3-(tert-butyl)benzene belongs to bromides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

A solution of bromo-tert- butylbenzene (4.62 g, 21.68 mmol) in THF (50 mL) was cooled to-78 °C then n- BuLi (2.5M, 9.1 mL) was added dropwise. The reaction was stirred for 30 min then a solution of 1-benzyl-piperidin-4-one (3.69 g, 19.5 mmol) in THF (10 mL) was added dropwise. After stirring for 30 min at-78 °C, the reaction was warmed to 0°C then quenched with water (50 mL). The reaction was diluted with ethyl acetate (100 mL); the organic was separated, washed with brine (50 mL), dried over magnesium sulfate and concentrated yielding an oil (6.94 g, 21.5 mmol), which was used in the next step without further purification; LC rt=2.98 min; MS (ESI) 306.2.

The synthetic route of 1-Bromo-3-(tert-butyl)benzene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ELAN PHARMACEUTICALS, INC.; WO2005/87215; (2005); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 3972-64-3, A common heterocyclic compound, 3972-64-3, name is 1-Bromo-3-(tert-butyl)benzene, molecular formula is C10H13Br, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A 1. 6 M solution of nbutyllithium (0.85 mL, 1.36 mmol) was added to a solution of dicyclohexylamine (0.27 mL, 1.36 mmol) in toluene (5 mL). After stirring for 5 min, a mixture of cisltrans isomers of 2-methyl-cyclohexanecarboxylic acid 2- trimethylsilanyl-ethyl ester (269 mg, 1.11 mmol) was added. After stirring for 30 min, 1-bromo-3-tert-butyl-benzene (248 mg, 1.16 mmol) was added followed by the simultaneous addition of tri-tert-butylphosphonium tetrafluoroborate (31 mg, 107 /mol) and tris (dibenzylideneacetone) dipalladium (O)-chloroform adduct (51 mg, 49. 3, mol). The solution was placed into a preheated oil bath at 60 °C. After stirring for 20 h, the solution was diluted with 10percent aqueous hydrochloric acid, and extracted with diethyl ether. The combined organic extracts were dried over magnesium sulfate, filtered, and concentrated. The residue was flash chromatographed with 49: 1,24 : 1, and 23: 2 hexanes: ethyl acetate as the eluant to yield 375 mg (90percent yield) of a mixture of cisltrans isomers of 1- (3-tert-butyl-phenyl)- 2-methyl-cyclohexanecarboxylic acid 2-trimethylsilanyl-ethyl ester as a yellow oil. Method [2] Retention time 3.67 min by HPLC and 3.75 min by MS (M+Na=397). Method [2] Retention time 3.77 min by HPLC and 3.85 min by MS (M+Na=397).

The synthetic route of 3972-64-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ELAN PHARMACEUTICALS, INC.; WO2005/87215; (2005); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Reference of 3972-64-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3972-64-3, name is 1-Bromo-3-(tert-butyl)benzene belongs to bromides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Compound 112a. To a solution of 1-bromo-3-(tert-butyl)benzene (0.2 g, 0.938 mmol, 1.0 equiv) in DMSO (10 mL) was added 4,4,4?,4?,5,5,5?,5?-octamethyl-2,2?-bi(1,3,2-dioxaborolane) (0.356 g, 1.41 mmol, 1.5 equiv), KOAc (0.184 g, 1.876 mmol, 2.0 equiv) and resulting reaction mixture purged with N2 gas for 10 minute, followed by the addition of Pd(PPh3)4 (0.055 g, 0.047 mmol. 0.05 equiv). The resulting reaction mixture was heated at 100 C. for overnight. Product formation was confirmed by LCMS. After the completion of reaction, the mixture was filtered through celite bed, washed with ethyl acetate (100 mL). Filtrate was concentrated under reduced pressure. The crude product obtained was purified by flash chromatography (hexane as an eluent) to obtain 2-(3-(tert-butyl)phenyl)-4,4,5,5-tetramethyl-1,3,2-dioxaborolane (0.230 g, 94.26% Yield) as an off-white solid. (0909) LCMS 261.3 [M+H]+ (0910) 1H NMR (400 MHz, DMSO-d6) delta7.67 (s, 1H), 7.57-7.45 (m, 2H), 7.32 (t, J=7.5 Hz, 1H), 1.44 (d, J=6.6 Hz, 1H), 1.39-1.23 (m, 9H), 1.23-1.04 (m, 12H)

The synthetic route of 1-Bromo-3-(tert-butyl)benzene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Praxis Biotech LLC; ALFARO, Jennifer; BELMAR, Sebastian; BERNALES, Sebastian; PUJALA, Brahmam; PANPATIL, Dayanand; BHATT, Bhawana; US2019/185451; (2019); A1;,
Bromide – Wikipedia,
bromide – Wiktionary