Category: 39478-78-9

Synthetic Route of 39478-78-9,Some common heterocyclic compound, 39478-78-9, name is 5-Bromo-2-methylaniline, molecular formula is C7H8BrN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Tetrakis(triphenylphosphine)palladium (0) (3.7 g, 0.003 mol) and 4-chlorophenylboronic acid (20.2 g, 0.13mol) are added to a solution of 5-bromo-2-methylaniline (20 g, 0.1 mol) in 1 ,2- dimethoxyethane (200 ml). After stirring the reaction mixture for 15 minutes at 200C, a solution of 20% aqueous sodium carbonate (300ml) is added to the mixture, and the resulting mixture is heated at reflux for 24 hours. The reaction mixture is cooled to room temperature, diluted with water (600 ml) and extracted using ethyl acetate. The combined organic extracts are dried over anhydrous sodium sulfate, filtered and the filtrate evaporated in vacuo. The residue is further purified by column chromatography on silica gel, eluting with 7% ethyl acetate in hexane to give 3-amino-4′-chloro-4-methylbiphenyl (21.0 g).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Bromo-2-methylaniline, its application will become more common.

Reference:
Patent; SYNGENTA PARTICIPATIONS AG; SYNGENTA LIMITED; WO2009/150093; (2009); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

39478-78-9, name is 5-Bromo-2-methylaniline, belongs to bromides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. 39478-78-9

General procedure: An equimolar mixture of isatin/5-bromoisatin and an aromatic primary amine were introduced into an Erlenmeyer flask. Ethanol (1 mL) and a few drops of acetic acid were added. The Erlenmeyer flask was placed in an ultrasonic bath filled with water (80 Hz,100%), the temperature was adjusted at 40C. At the end of the reaction (monitored by TLC), the product obtained by filtration was recrystallized from ethanol. For the reactions carried out in microwave Biotage, the reagents in 4 mL of ethanol were put in a magnetic stir bar for 2-5 mL vial and the temperature was set at 150C, 160C then 180C.

Statistics shows that 39478-78-9 is playing an increasingly important role. we look forward to future research findings about 5-Bromo-2-methylaniline.

Reference:
Article; Chemchem, Meryem; Menacer, Rafik; Merabet, Naima; Bouridane, Hamida; Yahiaoui, Samir; Moussaoui, Sadjia; Belkhiri, Lotfi; Journal of Molecular Structure; vol. 1208; (2020);,
Bromide – Wikipedia,
bromide – Wiktionary

The chemical industry reduces the impact on the environment during synthesis 39478-78-9, name is 5-Bromo-2-methylaniline, I believe this compound will play a more active role in future production and life. 39478-78-9

The compound 5-bromo-2-methylaniline (3.0g, 16.1mmol),Alpha-bromocyclopropanone (2.9 g, 17.7 mmol) and N,N-diisopropylethylamine (4.2 g, 32.2 mmol) were dissolved in 100 ml of toluene and reacted at 100C for 15 hours.After the reaction is over, the reaction solution is concentrated,The residue was subjected to silica gel column chromatography (ethyl acetate: petroleum ether = 1:30) to obtain 3.37g of product,The yield was 78.4%.

The chemical industry reduces the impact on the environment during synthesis 39478-78-9. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Shandong Xuanzhu Pharmaceutical Technology Co., Ltd.; Wang Tingzhong; Liu Bin; (33 pag.)CN111170995; (2020); A;,
Bromide – Wikipedia,
bromide – Wiktionary

39478-78-9,Some common heterocyclic compound, 39478-78-9, name is 5-Bromo-2-methylaniline, molecular formula is C7H8BrN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution 5-bromo-2-methyl aniline (6.38 g, 36.74 mmol) in EtOH (30 ml) was added acetonyl acetone (5.0 ml, 42.62 mmol) and one drop of conc. aqueous HCl. The mixture was heated at reflux for 18 h and then cooled. Solvent was evaporated to dryness under reduced pressure and the residue was partitioned between water and EtOAc. The organic layer was separated and washed with water and brine dried over MgSO4, filtered and concentrated to dryness under reduced pressure. Purification of the residue by flash chromatography (hex:EtOAc/8:2) gave 5.8 g of 1-(5-bromo-2-methyl-phenyl)-2,5-dimethyl-1H-pyrrole (60%) as a clear oil.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Bromo-2-methylaniline, its application will become more common.

Reference:
Patent; Brotherton-Pleiss, Christine E.; Caroon, Joan Marie; Lopez-Tapia, Francisco Javier; Walker, Keith Adrian Murray; US2011/28502; (2011); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

39478-78-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 39478-78-9, name is 5-Bromo-2-methylaniline belongs to bromides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

5-Bromo-2-methylphenol; A solution of concentrated sulphuric acid (6 mL) in distilled water (75 mL) was added to 5-bromo-2-methylaniline (1 g, 5.38 mmol). The resultant suspension was heated to 90 C. and stirred for 4.5 h. The reaction mixture was then cooled using an ice bath and a solution of sodium nitrite (384 mg, 5.57 mmol) in water (5 mL) was added to the reaction mixture at 0 C. The reaction was then allowed to warm to ambient temperature. The reaction mixture was then added to a solution of concentrated sulphuric acid (6 mL) in water (75 mL) which had been preheated to 90 C. The reaction mixture was stirred for 1 h at 90 C. and allowed to cool, on standing, overnight. A precipitate was observed in the reaction mixture. The precipitate was collected by filtration, washed with water, and dried in a vacuum oven to afford 5-bromo-2-methylphenol as a brown solid (510 mg, 2.73 mmol, 51%). M.S. (ESI) (m/z) 185, 187[M-H]-

The synthetic route of 39478-78-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; N.V. Organon; US2007/185156; (2007); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

39478-78-9, Adding some certain compound to certain chemical reactions, such as: 39478-78-9, name is 5-Bromo-2-methylaniline, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 39478-78-9.

General procedure: In a typical run, h-BN(at)Fur(at)Pd(OAc)2 (0.05 mmol) was added to a mixture of arylboronic acid 1 (1.0 mmol), aryl bromide 2 (1.5 mmol) and K2CO3 (1.5 mmol) in water (1 mL). The resulting mixture was stirred at 70 C under Ar protection, and the progress of the reaction was monitored by TLC. After completion of the reaction, ethyl acetate was added to the reaction mixture and the catalyst was separated. The organic phase was washed with water, dried over anhydrous Na2SO4 and the solvent was evaporated under reduced pressure. Finally, the residue was isolated by chromatography on a column of silica gel to afford the corresponding product 3.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 39478-78-9.

Reference:
Article; Li, Weijian; Lv, Guanghui; Cheng, Xu; Sang, Rui; Ma, Xiaojun; Zhang, Yong; Nie, Ruifang; Li, Jie; Guan, Mei; Wu, Yong; Tetrahedron; vol. 72; 52; (2016); p. 8557 – 8564;,
Bromide – Wikipedia,
bromide – Wiktionary