Category: 337915-79-4

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 337915-79-4, name is 5-Bromo-N1-methylbenzene-1,2-diamine, A new synthetic method of this compound is introduced below., name: 5-Bromo-N1-methylbenzene-1,2-diamine

To a round bottom flask was added 4-bromo-N2-methylbenzene-1,2-diamine (1-2) (9.07 g, 45.1 mmol), sulfamide (8.84 g, 92 mmol), and finally anhydrous pyridine (75 mL). The reaction mixture was then heated to 125C while stirring in a hot oil bath with a water cooled reflux condenser attached under an atmosphere of nitrogen for 14 hours. The crude reaction mixture was then allowed to cool to room temperature, suspended in ethyl acetate and added 6N HCl until pH <3. Crude mixture was then filtered. Filtrate organics were separated, then washed with 6N HCl twice dried over sodium sulfate, filtered, and concentrated to give 6- bromo-1 -methyl- 1,3-dihydro-2,1,3-benzothiadiazole 2,2-dioxide (1-3). HRMS (M+H)+:observed = 262.9486, calculated = 262.9484. The synthetic route of 337915-79-4 has been constantly updated, and we look forward to future research findings. Reference:
Patent; MERCK SHARP & DOHME CORP.; LAYTON, Mark, E.; KELLY, Michael, J.; HARTINGH, Timothy, J.; WO2011/109277; (2011); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Electric Literature of 337915-79-4, A common heterocyclic compound, 337915-79-4, name is 5-Bromo-N1-methylbenzene-1,2-diamine, molecular formula is C7H9BrN2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

[000849j To a stirred solution of compound 3 (1 g, 1 eq) in POC13 (2 mL), cyclopropane carboxylic acid (0.5 mL) were added. The resulting reaction mixture was heated at 120 C for 3h. The progress of the reaction was monitored by TLC. After completion of the reaction, the reaction mixture was quenched with saturated sodium bicarbonate solution and extracted with ethyl acetate (3 X 20 mL). Combined organic extracts were washed with brine, dried over anhydrous sodium sulfate and evaporated under reduced pressure. The crude product was purified by column chromatography on silica gel 100-200 mesh using 20% EtOAc-hexane to afford the title compound 4. LCMS (mlz): 250.95 (M + 1).

The synthetic route of 337915-79-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BIOMARIN PHARMACEUTICAL INC.; BHAGWAT, Shripad; WANG, Bing; LUEDTKE, Gregory R.; SPYVEE, Mark; (490 pag.)WO2016/57834; (2016); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 337915-79-4, name is 5-Bromo-N1-methylbenzene-1,2-diamine, This compound has unique chemical properties. The synthetic route is as follows., Safety of 5-Bromo-N1-methylbenzene-1,2-diamine

To a cooled (0 0C) and stirred suspension of (2-amino-5-bromophenyl)methylamine (9.5g, may be prepared as described in intermediate 46) in 2M hydrobromic acid was added dropwise a cooled (5 0C) solution of sodium nitrite (4.02 g) in water (50 ml). The resultant mixture was stirred at 5 0C for 0.5 hr and then at 15-20 0C for 4 hr. The mixture was partitioned between EtOAc (500 ml) and saturated aqueous sodium bicarbonate (500 ml). The aqueous phase was separated off and extracted with EtOAc (500 ml). The organic phases were combined, washed with water and brine, dried (magnesium sulphate) and adsorbed on to silica gel prior to flash chromatography over silica gel, eluting with EtOAc / cyclohexane (1 :3). Fractions containing the target compound were combined and evaporated to give a brown solid (4.48 g). 2.61 g of this was further purified by chromatography over silica gel, eluting with 2% MeOH in chloroform. The appropriate fractions were combined and evaporated to give the target compound as a pale brown solid (1.3O g).

According to the analysis of related databases, 337915-79-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; GLAXO GROUP LIMITED; BLUNT, Richard; EATHERTON, Andrew John; GARZYA, Vincenzo; HEALY, Mark Patrick; MYATT, James; PORTER, Roderick Alan; WO2011/12622; (2011); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Application of 337915-79-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 337915-79-4 name is 5-Bromo-N1-methylbenzene-1,2-diamine, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

In a microwave vial, a mixture of 5-bromo-N1 -methylbenzene-1 ,2-diamine (0.20 g, 0.99 mmol), terephthalaldehyde (66 mg, 0.49 mmol) and sodium metabisulfite (0.22 g, 1 .19 mmol) in anhydrous N,N?-dimethylacetamide (5.00 ml.) was heated at 180 C for 30 min. The reaction mixture was cooled to room temperature and slowly poured into ice cold water (30 mL). The precipitated product was collected by filtration under vacuum to obtain the crude product. The product was recrystallized from hot methanol, filtered under vacuum and dried to obtain 1 , 4-bis (6-bromo-1 -methyl-1 H-benzo[d]imidazol-2-yl) benzene. 1 H NMR (400 MHz, DMSO-d6) d: 8.08 (s, 4H), 7.98 (s, 2H), 7.68 (d, J = 8.4 Hz, 2H), 7.41 (d, J = 8.4 Hz, 2H), 3.96 (s, 6H); MS (ESI + APCI): m/z = 497 [M + H]+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Bromo-N1-methylbenzene-1,2-diamine, and friends who are interested can also refer to it.

Reference:
Patent; THE SCRIPPS RESEARCH INSTITUTE; EXPANSION THERAPEUTICS, INC.; DISNEY, Matthew; BLIZZARD, Timothy, Allen; RZUCZEK, Suzanne; NDUNGU, John; VACCA, Joseph; JENNINGS, Andy; PUSHECHNIKOV, Alexei; (333 pag.)WO2019/99777; (2019); A2;,
Bromide – Wikipedia,
bromide – Wiktionary

Related Products of 337915-79-4, A common heterocyclic compound, 337915-79-4, name is 5-Bromo-N1-methylbenzene-1,2-diamine, molecular formula is C7H9BrN2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of intermediate 2 (5g, 21.6mmol) in EtOH (200ml) was added portionwise SnCl2.2H2O (9.8g, 43mmol) and the mixture was heated under reflux for 4 hours and then concentrated under reduced pressure. The residue was treated with water (200ml) and NaOH 1N (100ml). After extraction with CH2CI2, the organic phase was dried over Na2SO4 and concentrated under reduced pressure. The residue was dissolved in toluene (50ml) and trimethylorthoformate (2.6ml, 24 mmol) and ARTS (0.2g) were added and the mixture was heated under reflux for 2 hours and then concentrated under reduced pressure. The residue was purified by chromatography on silica gel eluting with CH2CI2/MeOH (95/5). The title compoundwas obtained as a cream powder (2.5g, 54.74%); m.p. 126-128C

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SMITHKLINE BEECHAM CORPORATION; WO2004/111046; (2004); A2;,
Bromide – Wikipedia,
bromide – Wiktionary

337915-79-4, name is 5-Bromo-N1-methylbenzene-1,2-diamine, belongs to bromides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. SDS of cas: 337915-79-4

Example 62 4- ( ( 4-Chlorobenzyl) oxy) -1- (2- (2, 2-difluorocyclopropyl) -1- methyl-lH-benzimidazol-6-yl ) pyridin-2 (1H) -one A) 6-Bromo-2- (2, 2-difluorocyclopropyl) -1-methyl-lH- benzimidazole A. mixture of 5-bromo-N1-methylbenzene-l, 2-diamine (300 mg) , HATU (567 mg) , N, N-diisopropylethylamine (0.255 ml), 2,2- difluorocyclopropanecarboxylic acid (182 mg) and DMF (10 ml) was stirred at room temperature for 1 h. The mixture was quenched with water and extracted with EtOAc. The organic layer was separated, washed with water and brine, dried over MgS04, passed through NH silica gel pad and concentrated in vacuo. The precipitate was washed with IPE/hexane, collected by filtration and dried in vacuo to give the title compound (255 mg) as a yellow solid. MS (ESI+) : [M+H]+ 288.9.

The synthetic route of 337915-79-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; TAKEDA PHARMACEUTICAL COMPANY LIMITED; KASAI, Shizuo; IGAWA, Hideyuki; TAKAHASHI, Masashi; MAEKAWA, Tsuyoshi; KAKEGAWA, Keiko; YASUMA, Tsuneo; KINA, Asato; AIDA, Jumpei; KHAMRAI, Uttam; KUNDU, Mrinalkanti; WO2013/105676; (2013); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 337915-79-4, A common heterocyclic compound, 337915-79-4, name is 5-Bromo-N1-methylbenzene-1,2-diamine, molecular formula is C7H9BrN2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 5-bromo-N1-methylbenzene-1,2-diamine (7.4 g, 37 mmol) in HC(OMe)3 (100 mL) was added TsOH (0.36 g, 1.9 mmol). The reaction mixture was heated at 100 C for 4 h and the solvent was removed in vacuo. The residue was dissolved in ethyl acetate (200 mL), washed with brine, dried over Na2SO4, and concentrated. The crude product was used in next step without further purification (7.3 g, 93%). LCMS (mlz): 212.1 (M+ 1).

The synthetic route of 337915-79-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; EPIZYME, INC.; DUNCAN, Kenneth, W.; CHESWORTH, Richard; MUNCHHOF, Michael, John; SHAPIRO, Gideon; (393 pag.)WO2015/200677; (2015); A2;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 337915-79-4, name is 5-Bromo-N1-methylbenzene-1,2-diamine, A new synthetic method of this compound is introduced below., Recommanded Product: 5-Bromo-N1-methylbenzene-1,2-diamine

B) Methyl (1RS,2SR)-2-(6-bromo-1-methyl-1H-benzimidazol-2-yl)cyclopropanecarboxylate [0305] O-(7-Azabenzotriazol-1-yl)-N,N,N’,N’-tetramethyluronium hexafluorophosphate (554 mg) was added to a solution of 4-bromo-N2-methylbenzene-1,2-diamine (279 mg), diisopropylethylamine (0.727 mL) and (1RS,2SR)-2-(methoxycarbonyl)cyclopropanecarboxylic acid (200 mg) in DMF (5 mL) at room temperature. The mixture was stirred for 1 hr. Water was added to the reaction mixture, and the mixture was extracted with ethyl acetate. The obtained organic layer was washed with water and brine, dried over magnesium sulfate and concentrated in vacuo. The obtained residue was dissolved in acetic acid (5 mL), and the mixture was stirred at 80C for 1 hr. After concentration of the reaction mixture, saturated sodium hydrogen carbonate was added to the residue, and the mixture was extracted with ethyl acetate. The obtained organic layer was washed with water and brine, dried over magnesium sulfate and concentrated in vacuo. The obtained residue was purified by silica gel column chromatography (methanol/ethyl acetate) to give the title compound (80 mg) as a pale brown solid. MS (ESI+):[M+H]+ 309.1. 1H NMR (400 MHz, DMSO-d6) delta 1.55 (1H, dt, J = 8.4, 4.3 Hz), 1.72-1.80 (1H, m), 2.26-2.36 (1H, m), 2.74 (1H, q, J = 8.4 Hz), 3.41 (3H, s), 3.72 (3H, s), 7.28 (1H, d, J = 8.5 Hz), 7.49 (1H, d, J = 8.5 Hz), 7.76 (1H, s).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Takeda Pharmaceutical Company Limited; KASAI, Shizuo; IGAWA, Hideyuki; TAKAHASHI, Masashi; KINA, Asato; EP2848621; (2015); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Reference of 337915-79-4,Some common heterocyclic compound, 337915-79-4, name is 5-Bromo-N1-methylbenzene-1,2-diamine, molecular formula is C7H9BrN2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of intermediate 2 (5g, 21.6mmol) in EtOH (200ml) was added portionwise SnCI2.2H2O (9.8g, 43mmol) and the mixture was heated under reflux for 4 hours and then concentrated under reduced pressure. The residue was treated with water (200ml) and 1N NaOH (100ml). After extraction with CH2CI2, the organic phase was dried over Na2SO4 and concentrated under reduced pressure. The residue was dissolved in toluene (50ml) and trimethylorthoformate (2.6ml, 24 mmol) and ARTS (0.2g) were added and the mixture was heated under reflux for 2 hours and then concentrated under reduced pressure. The residue was purified by chromatography on silica gel eluting with CH2CI2/MeOH (95/5). The title compound was obtained as a cream powder (2.5g, 54.74%); m.p. 126-128C.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Bromo-N1-methylbenzene-1,2-diamine, its application will become more common.

Reference:
Patent; SMITHKLINE BEECHAM CORPORATION; WO2004/111036; (2004); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 337915-79-4, name is 5-Bromo-N1-methylbenzene-1,2-diamine, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 337915-79-4, name: 5-Bromo-N1-methylbenzene-1,2-diamine

Example 45 4- ( (4-Chlorobenzyl) oxy) -1- (l-methyl-2- (trifluoromethyl) -1H- benzimidazol-6-yl) pyridin-2 (1H) -one A) 6-Bromo-l-methyl-2- (trifluoromethyl ) -lH-benzimidazole The mixture of 5-bromo-N1-methylbenzene-l, 2-diamine (300 mg) and TFA (10 ml) was stirred at 90C overnight. The mixture was quenched with saturated NaHC03 solution and extracted with EtOAc. The organic layer was separated, washed with water and brine, dried over MgS04, passed through NH silica gel pad and concentrated in vacuo. The precipitate was collected by filtration, washed with IPE/hexane and dried in vacuo to give the title compound (265 mg) as a purple solid. MS (ESI+) : [M+H] + 280.9.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Bromo-N1-methylbenzene-1,2-diamine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; TAKEDA PHARMACEUTICAL COMPANY LIMITED; KASAI, Shizuo; IGAWA, Hideyuki; TAKAHASHI, Masashi; MAEKAWA, Tsuyoshi; KAKEGAWA, Keiko; YASUMA, Tsuneo; KINA, Asato; AIDA, Jumpei; KHAMRAI, Uttam; KUNDU, Mrinalkanti; WO2013/105676; (2013); A1;,
Bromide – Wikipedia,
bromide – Wiktionary