Month: June 2021

Reference of 327-51-5, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 327-51-5 as follows.

1,4-Dibromo-2,5-difluorobenzene, 4-methoxycarbonylphenylboronic acid, potassium carbonate and tetrakis (triphenylphosphine) palladium were placed in a reaction In the reactor, and ethylene glycol dimethyl ether was added to the reactor, Then under the protection of nitrogen at 85 C for 36h after the first reaction A reaction solution, after the first reaction solution is cooled, The first reaction solution was poured into water and extracted with dichloromethane, and then ethylene glycol dimethyl ether was removed, The remaining material after pumping away ethylene glycol dimethyl ether, separated and purified by silica gel column chromatography to give To the intermediate product 2 ‘, 5′-difluoro- [1,1’: 4 ‘, 1 “-terphenyl] -4,4” -dimethyl ester;

According to the analysis of related databases, 327-51-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Guangdong University of Technology; He Jun; Huang Jian; Cao Peng; He Yonghe; Huang Jiahong; (22 pag.)CN105542751; (2017); B;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 60956-23-2,Some common heterocyclic compound, 60956-23-2, name is 1,2-Dibromo-4-methylbenzene, molecular formula is C7H6Br2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A 12 mL vial was charged with Pd(OAc)2 (2 mol%), BuPAd2 (6 mol%), and a stirring bar. Then, 2 ml dioxane and 1 mmol of bromobenzene were injected by syringe. The vial (or several vials) was placed in an alloy plate, which was transferred into a 300 mL autoclave of the 4560 series from Parr Instruments under argon atmosphere. After flushing the autoclave three times with NH3, a pressure of 2 bar NH3 and 2 bar CO was adjusted at ambient temperature. Then, the reaction was performed for 16 hours at 100 oC. After the reaction is finished, the autoclave was cooled down to room temperature and the pressure was released carefully. Then, CuI (5 mol%), DMEDA (10%), K2CO3 (3 mmol) and 1,2-dibromobenzene were added in under air, the vial was closed and heated to 110oC for 20 hours. The reaction mixture cooled down to room temperature. The solution was extracted 3-5 times with 2-3 ml of ethyl acetate from aqua solution. After evaporation of the organic solvent the residue was adsorbed on silica gel and the crude product was purified by column chromatography using n-heptane/AcOEt (20:1) as eluent.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1,2-Dibromo-4-methylbenzene, its application will become more common.

Reference:
Article; Wu, Xiao-Feng; Neumann, Helfried; Neumann, Stephan; Beller, Matthias; Tetrahedron Letters; vol. 54; 24; (2013); p. 3040 – 3042;,
Bromide – Wikipedia,
bromide – Wiktionary

Related Products of 502496-36-8,Some common heterocyclic compound, 502496-36-8, name is 3-Bromo-5-fluoro-2-methylaniline, molecular formula is C7H7BrFN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

[00404] 3-Bromo-5-fluoro-2-methyl-aniline (725 mg, 3.55 mmol), bis(pinacolato)diboron(1 .08 g, 4.26 mmol) and potassium acetate (1 .05 mg, 10.7 mmol) were mixed in 1 ,4-dioxane (35 mL) and nitrogen gas was blown through for 5 minutes. 1,1-Bis(diphenyl-phosphino)ferrocene- palladium(1,1)dichloride DCM adduct (174 mg, 0.21 mmol) was added and the mixture was heated under ref lux conditions for 4 hours. The reaction was allowed to cool – excess dioxanewas removed and the residue was diluted with EtOAc and filtered through celite. The organic solution was concentrated. The crude material was purified by column chromatography (24g silica) with a gradient 0 – 50% EtOAc in hexanes to give 5-fluoro-2-methyl-3-(4,4,5,5- tetramethyl-1 ,3,2-dioxaborolan-2-yl)aniline (0.761 g, 2.79 mmol, 78.5%).[00405] 1H NMR (DMSO-d6): O 6.91 (dd, J= 2.7 and 9.0 Hz, 1H), 6.50 (dd, J= 2.6 and10.0 Hz, 1H), 3.88 (bs, 2H), 2.34 (5, 3H), 1.36 (5, 12H).

The synthetic route of 502496-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; CANCER RESEARCH TECHNOLOGY LIMITED; GOLDBERG, Kristin; HAMILTON, Niall; JONES, Stuart; JORDAN, Allan; LYONS, Amanda; NEWTON, Rebecca; OGILVIE, Donald; WASZKOWYCZ, Bohdan; WO2015/79251; (2015); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Electric Literature of 10485-09-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 10485-09-3, name is 2-Bromoindene belongs to bromides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Production Example 1 Synthesis of a Li salt of 2,2′-diindenyldimethylsilane In a 200 ml-two-neck flask, THF (10 ml) and Mg (2.5g, 1.0 mmol) were incorporated. Further, 1,2-dibromoethane (0.1 ml) was added. The resultant was stirred at room temperature for 10 minutes, whereby the Mg surface was activated. To this, 2-bromoindene (5.0g, 26 mmol) which had been dissolved in THF (40 ml) was added dropwise by means of a pressure equalizing funnel. The resulting reaction mixture was cooled on ice bath, and then, dichlorodimethylsilane (29.7 ml, 246 mmol) was added dropwise. After stirring the reaction mixture for overnight, the solvent was distilled off. Extraction was conducted from the resulting solid by using hexane (50 ml * 2). By subjecting the resulting extraction solution to evaporation dryness, 2,2′-diindenyldimethylsilane was obtained as a pale yellow oily product (3.47g, 12.0 mmol, 94%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Bromoindene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Idemitsu Kosan Co., Ltd.; YABUGAMI, Minoru; OKAMOTO, Takuji; EP2650300; (2013); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Application of 2695-48-9, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 2695-48-9 as follows.

To a mixture of magnesium turnings (613.5 mg, 25.25 mmol) in dry diethyl ether (30 ml) was added 8-bromo-1-octene (4.236 ml, 25.25 mmol) and stirred at room temperature for 1 h until magnesium was dissolved. Then to the Grignard solution was added dry benzene (15 ml) and followed 5,5,6,6,6-pentafluorohaxaxenitrile (1.89 g, 10.10 mmol) dissolved in dry diethyl ether (15 ml) was added dropwise at room temperature. After the reaction mixture was stirred for 1 h, 1N hydrochloric acid solution (27 ml) was added and stirred for 1 hour additionally. Then to the reaction solution was added water, which was extracted with ethyl acetate. The organic layer was washed with water and saturated sodium chloride solution, dried over anhydrous magnesium sulfate and concentrated under reduced pressure. The residue was purified with column chromatography (n-hexane:ethyl acetate=9:1) to give 1.892 g (yield: 62%) of the title compound as a colorless oil. [01353] 1H-NMR (270 MHz, CDCl3) delta: 5.83-5.71 (m, 1H, CH2CH), 4.96 (d, J=17 Hz, 1H, CH2CH), 4.92 (d, J=11 Hz, 1H, CH2CH), 2.51 (t, J=7 Hz, 2H, COCH2), 2.39 (t, J=7 Hz, 2H, COCH2), 2.03-1.83 (m, 6H, CH2CHCH2 and CF2CH2CH2), 1.56 (m, 2H, COCH2CH2), 1.29 (m, 6H, CH2CH2CH2).

According to the analysis of related databases, 2695-48-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Chugai Seiyaku Kabushiki Kaisha; US6645951; (2003); B1;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 4117-09-3, name is 7-Bromo-1-heptene, A new synthetic method of this compound is introduced below., Recommanded Product: 7-Bromo-1-heptene

9-Hept-6-enyloxy-5-hydroxymethyl-2-isopropyl-l-methyl-l,4,5,6-tetrahydro- 2H-benzo[e][l,4]diazoein-3-one (3): 7-Bromo-l-heptene (44 muL, 0.29 mmol), KI (72 mg, 0.43 mmol), and K2CO3 (80 mg, 0.58 mmol) were added to a solution of compound 2 (40 mg, 0.14 mmol) in anhydrous N,iV-dimethylformamide (DMF; 2 mL), and then heated at 8O0C for 8 h. The mixture was cooled and extracted with EtOAc (50 mL), washed with H2O (30 mL) and brine (30 mL), dried over anhydrous Na2Stheta4 (sodium sulfate), concentrated, and purified by column chromatography to afford compound 3 (17 mg, 31%); [af£ -221.23 (c=0.09 in MeOH); 1H NMR (400 MHz, CDCl3): delta=6.93 (brs, 1 H), 6.92 (d, /=8.0 Hz, 1 H), 6.52 (d, /=4.0 Hz, 1 H), 6.41 (dd, /=4.0, 8.0 Hz, 1 H), 5.87-5.77 (m, 1 H), 5.03-4.94 (m, 2 H), 3.93- 3.89 (m, 3 H), 3.72-3.66 (m, 2 H), 3.50-3.48 (m, 2 H), 3.03 (dd, /=8.0, 16.0 Hz, 1 H), 2.77 (s, 3 H), 2.77-2.69 (m, 1 H), 2.45-2.37 (m, 1 H), 2.09-2.08 (m, 2 H), 1.79- 1.76 (m, 2 H), 1.47- 1.46 (m, 4 H), 1.05 (d, /=8.0 Hz, 3H), 0.87 ppm (d, /=8.0 Hz, 3H); 13C NMR (100 MHz, CDCl3): delta =174.4, 159.0, 152.8, 139.0, 132.5, 123.2, 1 14.7, 106.8, 106.6, 70.0, 68.1, 66.1 , 54.8, 36.7, 35.3, 33.9, 29.4, 28.9, 28.5, 25.8, 20.7, 20.1 ppm; ESI-HRMS calculated for [C22H34N2O3+H]”: 375.2648, found: 375.2642; HPLC purity: 95.1 %.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; THE BOARD OF TRUSTEES OF THE UNIVERSITY OF ILLINOIS; KOZIKOWSKI, Alan; CHEN, Yihua; WO2010/17272; (2010); A2;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 937046-98-5,Some common heterocyclic compound, 937046-98-5, name is 7-Bromopyrrolo[2,1-f][1,2,4]triazin-4-amine, molecular formula is C6H5BrN4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a degassed solution of 7-bromopyrrolo[2,l-f][l,2,4]triazin-4-ylamine (10.0 g, 46.9 mmol) in anhydrous DMF (78 mL) and triethylamine (47 mL) was added tetrakis(triphenylphosphine)palladium(0) (2.17 g, 1.88 mmol, 0.04 eq) and copper (I) bromide dimethylsulfide complex (0.77 g, 3.75 mmol, 0.08 eq). After degassing with N2 for 5 min., propargyl alcohol (8.2 mL, 140.8 mmol, 3.0 eq) was added, and the reaction mixture was stirred at 900C for 6h. The reaction was quenched with 5% aq. NH3 in saturated aq. NH4Cl. The aqeuous layer was washed with EtOAc (Ix) followed by 25% iPrOH in DCM (3x). The combined organic layers were dried over MgSO4, filtered through a pad of celite, and concentrated at reduced pressure. The crude product was purified by MPLC eluted with 5% EtOH/DCM. Trituration from EtOAc afforded 4.75 g (53.8%) of the desired product as a yellow solid. 1H-NMR (DMSO-^6) §7.89 (s, IH), 7.88 (broad s, 2H), 6.85 (dd, 2H), 5.39 (t, IH), 4.36 (d, 2H); MS LC-MS [M+H]+ = 189, RT = 1.08 min.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 7-Bromopyrrolo[2,1-f][1,2,4]triazin-4-amine, its application will become more common.

Reference:
Patent; BAYER PHARMACEUTICALS CORPORATION; WO2007/64931; (2007); A2;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 112734-22-2, name is (4-Bromo-2-fluorophenyl)methanamine, A new synthetic method of this compound is introduced below., Quality Control of (4-Bromo-2-fluorophenyl)methanamine

To a solution of (4-bromo-2-fluorophenyl) methanamine (2.5 g, 12 mmol) in CH2Cl2 (50 mL) at 0 C was added di-tert-butyl dicarbonate (4.01 g, 18 mmol) and triethylamine (2.6 mL, 18 mmol). The mixture was allowed to warm to room temperature and stirred for 2h. Water was added (50 mL) and the layers were separated. The organic layer was washed with brine, dried over sodium sulfate and concentrated in vacuo. The crude product was purified by flash silica column chromatography (heptane:ethyl acetate) (1:0 to 4:1) to afford the title compound as a colorless oil. (2.7 g, 71%). 1H NMR (400 MHz, DMSO-d6) delta ppm 7.21-7.26 (m, 3 H), 4.90 (br s, H), 4.27-4.33 (m, 2 H), 1.44 (s, 9 H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Emergent Product Development Gaithersburg Inc.; Roussel, Patrick; Heim, Jutta; Schneider, Peter; Bartels, Christian; Liu, Yaoquan; Dale, Glenn; Milligan, Daniel; (107 pag.)EP3034078; (2016); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

These common heterocyclic compound, 4333-56-6, name is Bromocyclopropane, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 4333-56-6

A flame dried two-neck round bottom flask fitted with a reflux condenser and N2 outlet was charged with anhydrous THF, freshly activated Mg (120 mg, 4.95 mmol) and a catalytic amount of iodine. A small portion of cyclopropyl bromide dissolved in THF was added. Afier initiation of reflux, the reaction mixture was cooled to -20 C. and the remaining cyclopropyl bromide (500 mg, 4.13 mmol) was gradually added. Afier 30 mm a freshly distilled solution of glyoxalate 45 (549 mg, 5.37 mmol) in THF was added over a 10 mm period and the resulting solution was stirred at -20 C. for 2 h before being quenched with a small amount of watet After 10 mm the reaction mixture was thrther diluted with water (50 mL) and extracted with ethyl acetate (3×50 mL). The organic extracts were combined, dried over anhydrous Mg504, filtered, concentrated in vacuo and purifiedby column chromatography eluting with ethyl acetate/nhexane (a gradient of 10-20%) to furnish ethyl a-hydroxy132 cyclopropaneacetate (422 mg, 71%) as a viscous oil. The oil (350 mg, 2.43 mmol) was dissolved in anhydrous DCM and cooled to 0 C. Then Ph3P (2.04 gm, 7.78 mmol) was added followed by C13r4 (1.20 gm, 3.64 mmol). The reactionmixture was stirred at 0 C. for 2 h and then concentrated in vacuo. The Ph3PO was precipitated by addition of n-hexane and removed by filtration. The crude reaction mixture was purified by flash column chromatography to furnish ethyl a-bromocyclopropaneacetate (46, R=c-Pr): (311 mg, 62%yield).

The synthetic route of Bromocyclopropane has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Brandeis University; University of Georgia Research Foundation, Inc.; The Brigham and Women’s Hospital, Inc.; Hedstrom, Lizbeth K.; Cuny, Gregory D.; Gollapalli, Deviprasad R.; Kirubakaran, Sivapriya; Maurya, Sushil K.; Striepen, Boris; Gorla, Suresh K.; Johnson, Corey R.; Kavitha, Mandapati; Khan, Jihan; (149 pag.)US10125116; (2018); B2;,
Bromide – Wikipedia,
bromide – Wiktionary

Electric Literature of 1647-23-0, The chemical industry reduces the impact on the environment during synthesis 1647-23-0, name is 1-Bromo-3,3-dimethylbutane, I believe this compound will play a more active role in future production and life.

EXAMPLE 24A Methyl 2-(4-fluorophenyl)-2,5,5-trimethylhexanoate A solution of the compound of Example 22A (11.75 g, 64.6 mmol) in tetrahydrofuran (30 mL) was added dropwise over 20 min to a -78 C. solution of lithium hexamethyldisilazide (previously prepared from hexamethyldisilazane (17.0 mL, 80.7 mmol) and n-butyllithium in hexane (2.5 M, 31.0 mL, 77.5 mmol)) in tetrahydrofuran (40 mL) and allowed to stir at that temperature for 1 h. The solution was then treated with 1-bromo-3,3-dimethylbutane (12.0 mL, 83.9 mmol), followed by stirring at -78 C. for 30 min, and then warming to 25 C. for 18 h. The solution was quenched by addition of saturated ammonium chloride solution (4 mL) and then concentrated in vacuo. The residue was diluted with ethyl acetate and water. The organic layer was extracted with water (2*), saturated NaCl solution and dried (Na2SO4). Concentration in vacuo afforded an oil, which was distilled under reduced pressure (90-93 C./0.3 mm Hg) to afford the product (4.85 g, 28%) as a colorless oil. 1H NMR (300 MHz, CDCl3): delta 0.86 (s, 9H) 1.03 (m, 2H) 1.51 (m, 3H) 1.86 (m, 1H) 2.00 (m, 1H) 3.65 (m, 3H) 7.03 (m, 2H) 7.27(m, 2H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Bromo-3,3-dimethylbutane, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Hutchinson, Douglas K.; Bellettini, John R.; Betebenner, David A.; Bishop, Richard D.; Borchardt, Thomas B.; Bosse, Todd D.; Cink, Russell D.; Flentge, Charles A.; Gates, Bradley D.; Green, Brian E.; Hinman, Mira M.; Huang, Peggy P.; Klein, Larry L.; Krueger, Allan C.; Larson, Daniel P.; Leanna, M. Robert; Liu, Dachun; Madigan, Darold L.; McDaniel, Keith F.; Randolph, John T.; Rockway, Todd W.; Rosenberg, Teresa A.; Stewart, Kent D.; Stoll, Vincent S.; Wagner, Rolf; Yeung, Ming C.; US2005/107364; (2005); A1;,
Bromide – Wikipedia,
bromide – Wiktionary