Month: June 2021

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1435-54-7, name is 1,3-Dibromo-2-fluorobenzene, This compound has unique chemical properties. The synthetic route is as follows., Formula: C6H3Br2F

To 1 .00 g (3.94 mol) 1 ,3-dibromo-2-fluoro-benzene, 820 mg (3.94 mmol) N-phenyl-1 H- benzimidazol-2-amine and 2.51 g (1 1.8 mmol) potassium phosphate tribasic in 15 ml DMA are added, and it is stirred at 160 C for 15 h under nitrogen. The reaction mixture is poured on water. The product is filtered off and washed with water. Yield 1.38 g (96.5 %) 1H NMR (400 MHz, CDCI3): delta = 8.87 (d,1 H), 7.74-7.80 (m, 3H), 7.62-7.67 (m, 2H), 7.49-7.53 (m, 2H), 7.36-7.43 (m, 2H), 7.25-7.30 (m, 1 H), 7.18 (t, 1 H)

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1435-54-7.

Reference:
Patent; IDEMITSU KOSAN CO., LTD.; SCHAeFER, Thomas; KAWAMURA, Masahiro; NAGASHIMA, Hideaki; (314 pag.)WO2017/56052; (2017); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Some common heterocyclic compound, 766-46-1, name is 2′-Bromophenylacetylene, molecular formula is C8H5Br, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C8H5Br

[Example 2] The following will describe other synthetic examples based on reaction formula (VI) below. First, a method of synthesis from 1,4-bis[(2-bromophenyl)ethynyl]-2,5-dibromobenzene (6) as a raw material will be described. A 3/1 toluene/triethylamine (9 mL) solution of 2-bromo-1-ethynylbenzene (90 mg, 4.98 mmol) was added to a mixed 3/1 toluene/triethylamine (12 mL) solution of 1,4-dibromo-2,5-diiodobenzene (1.15 g, 2.35 mmol), dichlorobis(triphenylphosphine) palladium (II) (33 mg, 47 mmol), and copper iodide (18 mg, 95 mmol) at room temperature and stirred for 12 hours at room temperature. A 1N aqueous solution of hydrochloric acid was added to the reaction mixture. The mixture was then subjected to extraction using methylene chloride. The obtained organic layer was washed in a saturated saline solution and dried with anhydrous magnesium sulfate. After removing the drying agent by filtering, the filtered solution was concentrated under reduced pressure. The resultant mixture was recrystallized from benzene, to obtain 1.17 g (1.97 mmol) of the target product 6 in the form of a white solid at a yield of 84%. 1H NMR (CDCl3): delta 7.20-7.35 (m, 4H), 7.59-7.65 (m, 4H), 7.83 (s, 2H). 13C NMR (CDCl3): delta 90.81, 95.00, 123.57, 124.47, 125.59, 126.40, 127.02, 130.15, 132.54, 133.66, 136.34. Anal. Calcd for C22H10Br4: C, 44.49; H, 1.70. Found: C, 44.42; H, 1.54.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 766-46-1, its application will become more common.

Reference:
Patent; Japan Science and Technology Agency; EP1548019; (2005); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 203302-95-8,Some common heterocyclic compound, 203302-95-8, name is 4-Bromo-3,5-difluoroaniline, molecular formula is C6H4BrF2N, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of the 4-bromo-3,5-difluoroaniline (5 g, 20 mmol) in acetic acid (60 mL) was added NIS (5.68 g). The reaction mixture was stirred at room temperature for two hours, and poured into water (300 mL). The product was extracted with ethyl acetate (2*200 mL), and the combined organic layers were washed with 1 N aqueous NaOH (200 mL) and saturated aqueous sodium thiosulfate (100 mL). The organic layer was dried over sodium sulfate, filtered and concentrated in vacuo. The oily residue was filtered through a plug of silica gel, eluting with heptane/ethyl acetate (4:1). The filtrate was concentrated in vacuo to give the title compound (7.34 g) as a white solid. 1H NMR (500 MHz, CDCl3) delta 6.44 (dd, J=10.00, 1.95 Hz, 1H) 4.46 (br. s., 2H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Bromo-3,5-difluoroaniline, its application will become more common.

Reference:
Patent; PFIZER INC.; Bhattacharya, Samit; Cameron, Kimberly; Dowling, Matthew; Fernando, Dilinie; Ebner, David; Filipski, Kevin; Kung, Daniel; Lee, Esther; Smith, Aaron; Tu, Meihua; US2013/267493; (2013); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Electric Literature of 28342-75-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 28342-75-8, name is 1,5-Dibromo-2,4-difluorobenzene belongs to bromides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Under a nitrogen atmosphere and at reflux temperature there was added 1,5-bromo-2,4-difluorobenzene (90.0 g), phenylboronic acid (which 88.6 g of), tripotassiumphosphate (154.0g), Pd-132 (Johnson Matthey (JohnsonMatthey)) (1.6g), toluene (900ml),isopropanol (300ml) and water (150ml) of the flask was heated for 1 hour. After stoppingthe reaction, the reaction solution was cooled until room temperature and water wasadded to carry out liquid separation. After the solvent was distilled off under reducedpressure, silica gel short column (eluent: heptane / toluene = 1/2 (volume ratio)) to bepurified, thereby obtaining 4 ‘, 6′-difluoro-1,1’: 3 ‘, 1’ – terphenyl (86.0g).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1,5-Dibromo-2,4-difluorobenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Kwansei Gakuin School Corporation; Tian, Shanzuoci; Zhong, Zhongzongyiliang; Zhong, Daoguiyi; Ping, Jingdagui; Xiao, Yeyangping; Zhi, Lianyizhi; Ni, Jingping; Song, Xiawusi; Sheng, Tianlizhao; (405 pag.)CN105431439; (2016); A;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 19190-91-1, name is 5,6-Dibromo-1,2-dihydroacenaphthylene, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 19190-91-1, HPLC of Formula: C12H8Br2

General procedure: Dibromoarene 1 (0.5 mmol), alkyne 2 (0.6 mmol), Pd(OAc)2 (5 mol%, 5.6 mg ),Xantphos (5.5 mol%,16 mg), K2CO3 (1.5 mmol, 207 mg) were added into a Schlenkflask. The flask was evacuated and backfilled with nitrogen (3 cycles). Dry DMF (5mL) was added by syringe. The mixture was heated to 120 C and stirred until thereaction finished (TLC analysis). After cooling to room temperature, the mixture wasextracted three times with ethyl acetate. The organic layers were combined and driedover Na2SO4. After filtration, the solvents were evaporated. The crude product wasfurther purified by silica gel chromatography, using petroleum ether and ethyl acetateas eluents to provide the pure product

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; An, Wenbo; Li, Gaoqiang; Ma, Jun; Tian, Youping; Xu, Feng; Synlett; vol. 25; 11; (2014); p. 1585 – 1590;,
Bromide – Wikipedia,
bromide – Wiktionary

Reference of 112734-22-2, These common heterocyclic compound, 112734-22-2, name is (4-Bromo-2-fluorophenyl)methanamine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step c) 2-[(4-Bromo-2-fluorophenyl)methyl]-1,2,3,4-tetrahydro-1,3-dioxo-4-isoquino-linecarboxylic Acid Methyl Ester To a solution of 3-methoxy-1-oxo-1H-2-benzopyran-4-carboxylic acid methyl ester (5.0 g, 21.37 mmol) in DMF (100 mL) were added 4-bromo-2-fluorobenzylamine (4.36 g, 21.37 mmol) and Et3 N (5.96 mL, 42.74 mmol). The mixture was stirred at 80 C. for 30 minutes, poured into H2 O (1500 mL), acidified with HCl (2N) and extracted with EtOAc. The organic extracts were dried over MgSO4. Evaporation and crystallization from acetone/hexane (after cooling to -20 C.) gave a white solid (7.6 g, 87.7%, m.p. 149-150 C.). 1 H NMR (DMSO-d6, 400 MHz): delta [3.67 (s), 4.0 (s), 3H, –CO2 Me, tautomeric], [5.06 (q), J=15.4 Hz, 5.30 (s), 2H, –NCH2 –, tautomeric], 5.4 (s), 1H, CH–CO2 Me, tautomeric], 7.07-8.43 (m, 7H, Ar–H, tautomeric) IR (KBr, cm-1): 1670 (CO), 1605 (CO) MS (+FAB): 406 (80, M+ +H), 374 (470, M+ –OCH3) Anal. Calcd.: C, 53.22; H, 3.23; N, 3.45; Found: C, 53.19; H, 2.98; N, 3.40.

The synthetic route of 112734-22-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; American Home Products Corporation; US5102886; (1992); A;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 22385-77-9, name is 1-Bromo-3,5-di-tert-butylbenzene, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 22385-77-9, Formula: C14H21Br

General procedure: To a mixture of Pd(OAc)2 (23 mg, 0.1 mmol), DPE-Phos (125 mg,0.2 mmol), and Cs2CO3 (652 mg, 2.0 mmol) was added a solutionof 4a (496 mg, 1.0 mmol) and 2-bromo-1,3,5-trimethylbenzene(300 mg, 1.5 mmol) in 1,4-dioxane (15 mL) under N2, and the reactionmixture was heated at 110 °C for 17 h with stirring. After coolingto r.t., and removal of solvents, the mixture was extracted withCH2Cl2 (3 × 20 mL), and the combined organic extracts werewashed with brine (20 mL) and dried (Na2SO4). Purification of theresidual oil by column chromatography on silica gel (hexanes?EtOAc, 10:1) afforded 5a

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Bromo-3,5-di-tert-butylbenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Zhu, Shifa; Wang, Chao; Zhao, Songxian; Xiao, Yelin; Hu, Lang; Huang, Zhipeng; Synthesis; vol. 46; 2; (2014); p. 212 – 224;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 445-02-3, name is 4-Bromo-2-(trifluoromethyl)aniline, A new synthetic method of this compound is introduced below., Recommanded Product: 445-02-3

Example 27(E)-1-[3-Cyclohexyl-2-(4-methanesulfonyl-3-trifluoromethyl-phenyl)-acryloyl]-3-methyl-urea A solution of isoamyl nitrite (4.02 mL, 30 mmol) in dimethyl disulfide (19.8 mL, 220 mmol) at 25 C. was slowly treated with 4-bromo-2-(trifluoromethyl)aniline (4.8 g, 20 mmol). The reaction was exothermic with gas evolution. The resulting brown reaction mixture was heated to 80-90 C. for 2 h, at which time, thin layer chromatography analysis of the reaction mixture indicated the absence of starting material. The reaction mixture was cooled to 25 C. and then concentrated in vacuo. The resulting residue was dissolved in ethyl acetate (200 mL). The organic layer was washed successively with a 1 N aqueous hydrochloric acid solution (1200 mL) and a saturated aqueous sodium chloride solution (1200 mL), dried over anhydrous magnesium sulfate, filtered, and concentrated in vacuo. Biotage chromatography (FLASH 40M, Silica, 8/1 hexanes/ethyl acetate) afforded 4-bromo-1-methylsulfanyl-2-trifluoromethyl-benzene (4.73 g, 87%) as a brown oil: EI-HRMS m/e calcd for C8H6BrF3S (M+) 269.9326, found 269.9327.

The synthetic route of 445-02-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Hoffmann-La Roche Inc.; US6353111; (2002); B1;,
Bromide – Wikipedia,
bromide – Wiktionary

76153-06-5, name is 5-Bromo-3-methylbenzene-1,2-diamine, belongs to bromides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Product Details of 76153-06-5

b 7-Bromo-5-methyl-1,2,3,4-tetrahydroquinoxalin-2,3-dione 13.05 g (64.9 mmol) of 5-bromo-2,3-diaminotoluene and 6.42 g (1.1 eq.) of oxalic acid are stirred under reflux for 16 hours in 2N hydrochloric acid. The mixture is cooled, and the solid is filtered off and washed with water. The title compound is obtained as a brown solid. 1 H-NMR (250 MHz, DMSO); delta==11.98, 11.32 (2s, 2NH), 7.13 (s, 2H), 2.33 (s, Me).

The synthetic route of 76153-06-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Novartis AG; US6117873; (2000); A;,
Bromide – Wikipedia,
bromide – Wiktionary

Related Products of 1137142-58-5,Some common heterocyclic compound, 1137142-58-5, name is 2-Bromoimidazo[2,1-b][1,3,4]thiadiazole, molecular formula is C4H2BrN3S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 30; 2-Bromo-imidazo[2,1-b][1,3,4]thiadiazole-5-suIfonic acid; The starting 2-bromo-imidazo[2,1-b][1,3,4]thiadiazole (2.0 g; 9.9 mmol) was dissolved in oleum (4.0 mL) and the resulting solution was heated at 80C for 8 hours. The reaction was allowed to cool to room temperature and then poured onto crushed ice. One spoon of sodium chloride was added and the resulting precipitate was isolated by vacuum filtration and washed with cold water. It was dried by azeotrope distillation with toluene. The title compound 2-bromo- imidazo[2,1-b][1,3,4]thiadiazole-5-sulfonic acid was isolated as a beige solid, (2.33 g; 83% yield).1H NMR (300 MHz, DMSO-d6): delta 7.30 (1 H, s). MS (ES+) m/z 283.9 (M+H)+ (MW: 218.08).

The synthetic route of 1137142-58-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; CENTRO NACIONAL DE INVESTIGACIONES ONCOLOGICAS (CNIO); WO2009/40552; (2009); A2;,
Bromide – Wikipedia,
bromide – Wiktionary