Month: June 2021

Reference of 103273-01-4, A common heterocyclic compound, 103273-01-4, name is 2-Bromo-4-(tert-butyl)aniline, molecular formula is C10H14BrN, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a mixture of 2-bromo-4- tert-butylaniline (Compound 1-1, 16.8 g, 74 mmol) and CuCN (13.29 g, 148 mmol) in a 250 mL round-bottom flask was added NMP (N-methylpyrrolidone, 100 mL) . The mixture was heated to reflux under nitrogen until TLC analysis showed full conversion of the starting material. The mixture was cooled to room temperature and the solvent was removed under vacuum. To the residue was added aq. NH40H at 0 C. Ethyl acetate was used for extraction (three times) . The combined organic phase was dried over anhydrous MgSC>4, filtered, and evaporated under vacuum. The residue was purified by flash chromatography (ethyl acetate : hexanes = 1:10) to provide the aminobenzonitrile Compound 1-2 as a yellow solid (10.8 g, 84% yield) . 1H NMR (400 MHz, CDC13) delta 7.39- 7.33 (m, 2H) , 6.70 (d, J = 8.4 Hz, 1H) , 4.32 (br, 2H, NH2), 1.25 (s, 9H) ; 13C NMR (100 MHz, CDC13) delta 147.48, 141.15, 131.77, 128.56, 118.22, 115.32, 95.63, 34.02, 31.21. HRMS (ESI-TOF) m/z Calcd for C11H15N2+ [M+H] + 175.1230, found 175.1235.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; THE SCRIPPS RESEARCH INSTITUTE; YU, Jin-Quan; (107 pag.)WO2016/123361; (2016); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

These common heterocyclic compound, 402-43-7, name is 1-Bromo-4-(trifluoromethyl)benzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 402-43-7

General procedure: A mixture of CuF2 (102 mg, 1.00 mmol), the aryl halide (500 mumol), 2-aminoethanol (74.9 muL, 1.25 mmol), and NaN3 (65.0 mg, 1.00 mmol) in DMA (1 mL) was stirred under an Ar atmosphere (balloon) at 95 C using a Chemistation personal organic synthesizer (EYELA, Tokyo). After complete consumption of the aryl halide was confirmed by TLC analyses or after 24 h (if the reaction was incomplete within 24 h), the mixture was diluted with EtOAc (10 mL) and then filtered through a Celite pad. The pad was successively washed with EtOAc (20 mL), H2O (25 mL), and concd aq ammonia solution (5 mL). After the two layers were separated, the aqueous layer was extracted with EtOAc (2×10 mL). The combined organic layers were washed with brine (20 mL), dried over MgSO4, filtered, and concentrated under reduced pressure. The residue was purified by silica-gel column chromatography with n-hexane/EtOAc or n-pentane/Et2O as the eluent.

The synthetic route of 1-Bromo-4-(trifluoromethyl)benzene has been constantly updated, and we look forward to future research findings.

Reference:
Article; Maejima, Toshihide; Shimoda, Yutaka; Nozaki, Kei; Mori, Shigeki; Sawama, Yoshinari; Monguchi, Yasunari; Sajiki, Hironao; Tetrahedron; vol. 68; 6; (2012); p. 1712 – 1722;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 348-57-2, name is 1-Bromo-2,4-difluorobenzene, A new synthetic method of this compound is introduced below., Application In Synthesis of 1-Bromo-2,4-difluorobenzene

39 mmol (7.52 g) of 1-bromo-2,4-difluorobenzene were loaded into a 100-ml flask, and the temperature of the 1-bromo-2,4-difluorobenzene was heated to 60C. Next, 0.15 g of iron was added, and then 39 mmol (6.23 g) of bromine were dropped over 3 hours while the temperature of the mixture was kept at 60C. After the completion of the dropping, the resultant was further subjected to a reaction at 60C for 2 hours. After the temperature of the resultant reaction liquid had been cooled to room temperature, the reaction liquid was charged into a cold aqueous solution of sodium hydroxide, and the reaction product was extracted with hexane. An organic layer was washed with pure water and a saturated sodium chloride solution, and was dehydrated with anhydrous sodium sulfate. After that, the solvent was removed. The resultant residue was purified by means of silica gel chromatography (developing solvent: hexane), whereby 8.81 g of a compound A as colorless oil were obtained (84% yield).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Chuo University; Idemitsu Kosan Co., Ltd.; EP1961743; (2008); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 176317-02-5, name is 1-Bromo-2,3,4-trifluorobenzene belongs to bromides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 1-Bromo-2,3,4-trifluorobenzene

EXAMPLE 232 (+)-(4aR)-(10bR)-4-methyl-8-(2,3,4-trifluorophenyl)-10b-methyl-1,2,3,4,4a,5,6,10b-octahydrobenzo[f]quinolin-3-one STR250 A 15 mL round bottom flask was charged with (+)-(4aR)-(10bR)-4-methyl-10b-methyl-1,2,3,4,4a,5,6,10b-octahydrobenzo[f]quinolin-3-one-8-boronic acid (178 mg, 0.65 mmol), tetrakis(triphenylphosphine)palladium(0) (23 mg, 0.02 mmol), 1-bromo-2,3,4-trifluorobenzene (137 mg, 0.65 mmol), 0.65 mL of 2M sodium carbonate and 2 mL of THF, fitted with a reflux condenser, and the stirred mixture was heated at 80, under nitrogen, for 24 h. The mixture was cooled, diluted with ethyl acetate (75 mL) and washed with brine (2*25 mL). The combined organic extracts were dried over sodium sulfate, concentrated, and purified by silica gel chromatography (70% ethyl acetate/hexanes eluent) to give 100 mg (43%) of the title compound as a white solid. mp 100-102. FDMS: m/e=359. alpha[D]589 =+7837 (c=0.33, chloroform).

The synthetic route of 176317-02-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Eli Lilly and Company; US5578724; (1996); A;,
Bromide – Wikipedia,
bromide – Wiktionary

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 58534-95-5, name is 3-Bromo-2-fluoroaniline, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C6H5BrFN

The product from step 1 (200 mg, 0.7268 mmol), 3-bromo-2-fluoro-phenylamine (165 mg, 0.7268 mmol, 1 eq.), Na2CO3 (616 mg, 5.814 mmol. 8 eq.) and Pd(PPh3)4 (84 mg, 0.1 eq.) are partially dissolved in a mixture of DMF (10 mL) and H2O (2 mL). N2 gas is bubbled through this reaction mixture for 5 minutes. The resulting mixture is heated to 150 C. in a sealed tube under microwave irradiation for 10 min. The reaction is diluted with EtOAc and sequentially washed with H2O, 1 N NaOH (aq), and saturated aqueous NaCl. The organic solution is dried over Na2SO4 and concentrated. The resulting residue is purified on silica gel (2:1 hexanes/EtOAc) to afford the aniline product as a yellow oil. ESMS m/z 259.1 (M+H+).

According to the analysis of related databases, 58534-95-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Irm LLC; US2009/75996; (2009); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

These common heterocyclic compound, 2924-09-6, name is 5-Bromo-2-fluoroaniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 5-Bromo-2-fluoroaniline

Stir the mixture of 5-bromo-2-fluoroaniline (800 mg, 4.26 mmol), cyclopropylboronic acid (434 mg, 5.05 mmol), tetrakis(triphenylphosphine)palladium(0) (242 mg, 0.21 mmol), cesium carbonate (2.7 g, 8.28 mmol) in dioxane (5 mL) and water (0.3 mL) under N2 atmosphere at 100C for 17 hrs. TLC (EtOAc:PE=l :3) shows the reaction is complete. Filter off the solid, concentrate the filtrate. Purify by flash chromatography (silica gel, EtOAc_PE=3:7) to afford the title compound (350 mg, 55%). MS: (M+l): 152.1.

The synthetic route of 5-Bromo-2-fluoroaniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; CROWN BIOSCIENCE INC. (TAICANG); ZHANG, Deyi; ZHANG, Ruihao; ZHONG, Boyu; SHIH, Chuan; WO2014/418; (2014); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 2695-48-9, name is 8-Bromo-1-octene, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 2695-48-9, Quality Control of 8-Bromo-1-octene

[00294] (Z)-8-bromo-l-chloro-l-octene (5): Following the general procedure, a solution of Mo-4 in benzene (0.1 M, 30 mu, 3.0 muiotaetaomicron, 3 mol %) was transferred by syringe to an oven- dried vial containing Z-l,2-dichloroethylene (48.5 mg, 0.5 mmol, 5.00 equiv), 8-bromo-l-octene (19.1 mg, 0.1 mmol, 1.00 equiv) and benzene (470 mu). The resulting solution was allowed to stir for 4 hours at 22 C. The reaction was quenched by addition of wet CDCI3 and analysis of the unpurified mixture revealed 90% consumption of 8-bromo-l-octene. The resulting orange oil was purified by silica gel chromatography (100%) hexanes) to afford 5 (17.4 mg, 0.0771 mmol, 77 % yield) in >98:<2 Z:E ratio as colorless oil. 1H NMR (400 MHz, CDC13): Z-isomer (major): delta 6.02 (1H, dt, J= 7.2, 1.6 Hz), 5.74 (1H, q, J= 7.2 Hz), 3.41 (2H, t, J= 6.8 Hz), 2.23 (2H, qd, J = 7.2, 1.6 Hz), 1.86 (2H, m), 1.49-1.31 (6H, m). At the same time, in my other blogs, there are other synthetic methods of this type of compound, 8-Bromo-1-octene, and friends who are interested can also refer to it. Reference:
Patent; MASSACHUSETTS INSTITUTE OF TECHNOLOGY; TRUSTEES OF BOSTON COLLEGE; HOVEYDA, Amir H.; ZHANG, Hanmo; KOH, Ming Joo; SCHROCK, Richard Royce; (163 pag.)WO2016/73750; (2016); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 327-52-6, name is 1-Bromo-2,4,5-trifluorobenzene, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 327-52-6, Recommanded Product: 327-52-6

13.2g metal magnesium and 400ml tetrahydrofuran were added into a clean flask. 116.05g trifluorobromobenzene was added thereto dropwisely after initiation by iodine and the reaction was kept at 30-40C for 3 hours for use. 29.9g (S)-methyl 3-(tert-butoxycarbonyl amino)-4-oxo-n-butyrate was dissolved in 300ml THF, and cooled to -20 C. The solution mentioned above was added thereto dropwisely over two hours and kept at the temperature for 3 hours. 400ml ammonium chloride solution was added dropwisely. Layers were separated. The aqueous layer was extracted with tetrahydrofuran. The organic layer was dried and concentrated to get 14.5g (3S)-methyl 3-(tert-butoxy carbonylamino)-4-hydroxy-4-(2,4,5-trifluoromethyl-phenyl)butyrate (yield: 66%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Bromo-2,4,5-trifluorobenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Zhejiang Jiuzhou Pharmaceutical Co., Ltd.; EP2481722; (2012); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 17247-58-4, A common heterocyclic compound, 17247-58-4, name is (Bromomethyl)cyclobutane, molecular formula is C5H9Br, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of 13 (176 mg, 0.5 mmol, 1 equiv.), anhydrous K2CO3 powder (346 mg, 2.5 mmol, 5 equiv.), and the appropriate bromoalkane (0.75 mmol, 1.5 equiv.) in DMF (1 mL) was stirred 40 C for 14 h. The mixture was poured into H2O (50 mL), and extracted with EtOAc (3×10 mL). The combined organic layers were washed with brine (10 mL), dried (MgSO4), and the solvent evaporated. The crude products were purified by flash chromatography eluting with CHCl3-MeOH (96:4) or recrystallized from isopropanol.

The synthetic route of 17247-58-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Banister, Samuel D.; Beinat, Corinne; Wilkinson, Shane M.; Shen, Bin; Bartoli, Cecilia; Selleri, Silvia; Da Pozzo, Eleonora; Martini, Claudia; Chin, Frederick T.; Kassiou, Michael; European Journal of Medicinal Chemistry; vol. 93; (2015); p. 392 – 400;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 454-79-5, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 454-79-5 as follows.

Under ice-cooling, 2.6 mL of diethyldisulfide was dropped to a mixture of 5.0 g of 2-bromo-5- (trifluoromethyl) aniline, 2.77 mL of isoamyl nitrite and 50 mL of acetonitrile. The reaction mixture was stirred at 50 C. for 6 hours. The reaction mixture was allowed to cool to room temperature, water was added and extracted with ethyl acetate. The obtained organic layer was washed with saturated brine, dried over anhydrous sodium sulfate and concentrated under reduced pressure. The resulting residue was subjected to silica gel chromatography to obtain 4.5 g of Intermediate 1-13 shown below.

According to the analysis of related databases, 454-79-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Sumitomo Chemical Co., Ltd.; Murakami, Shin’ichirou; (398 pag.)JP2019/94335; (2019); A;,
Bromide – Wikipedia,
bromide – Wiktionary