Awesome and Easy Science Experiments about C6H13BrO

Interested yet? Read on for other articles about 4286-55-9, you can contact me at any time and look forward to more communication. Recommanded Product: 6-Bromohexan-1-ol.

The reaction rate of a catalyzed reaction is faster than the reaction rate of the uncatalyzed reaction at the same temperature. 4286-55-9, Name is 6-Bromohexan-1-ol, SMILES is OCCCCCCBr, in an article , author is Qadafi, Muammar, once mentioned of 4286-55-9, Recommanded Product: 6-Bromohexan-1-ol.

Effects of microbubble pre-ozonation time and pH on trihalomethanes and haloacetic acids formation in pilot-scale tropical peat water treatments for drinking water purposes

The high concentrations of dissolved organicmatter (DOM), chloride, and bromide in tropical peat water have a significant impact on the formation of carcinogenic disinfection by-products (DBPs) such as trihalomethanes (THMs) and haloacetic acids (HAAs), especially during the chlorination process. Therefore, other pretreatment methods to effectively remove these harmful substances in the water during treatment are needed. The aim of this study was to determine the effects of microbubble pre-ozonation pH on the reduction of THM4 and HAA5 formed during the peat water treatment process and to determine the best conditions for microbubble pre-ozonation to reduce the formation of these two classes of DBPs. The microbubble pre-ozonation was conducted at a pH of 5.5, 7, and 8.5. Furthermore, the primary treatments applied after this pretreatment were coagulation and activated carbon adsorption before post-chlorine disinfection. The coagulation process using aluminum sulfate and activated carbon adsorption succeeded in reducing the formation of THM4 after chlorination, to a level below USEPA standards, but the concentration of HAA5 was still high. However, the use of microbubble preozonation significantly reduced the formation of both classes of compounds during the chlorination process of the peatwater. Also, the concentration of THM4 increased during the pre-ozonation process in all pH conditions, but HAA5 decreased except in alkaline state. Furthermore, the ideal conditions for microbubble pre-ozonation on peat water were at pH 7 (neutral) after 30 min, with the total THM4 concentration at 33.73 +/- 0.40 mu g/L, and that of HAA5 at 49.89 +/- 0.09 mu g/L, falling below the USEPA standard. (C) 2020 Elsevier B.V. All rights reserved.

Interested yet? Read on for other articles about 4286-55-9, you can contact me at any time and look forward to more communication. Recommanded Product: 6-Bromohexan-1-ol.