1003-99-2, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1003-99-2, name is 2-Bromo-5-fluoroaniline, This compound has unique chemical properties. The synthetic route is as follows.
To a 2-L reactor equipped with a mechanic agitator, a condenser, a thermocouple, a baffle, and nitrogen inlet were charged 228 g of water, 200 g of 2-bromo-5-fluoroaniline and 80 g of 4-nitrophenol. To this mixture was charged 96percent sulfuric acid in 10-30 min at 20-120¡ã C. The mixture was heated to 135-140¡ã C. and 194 g of glycerol was charged into the reactor over two hours at 135-145¡ã C. The mixture was held at 135-145¡ã C. for 1 hour after the addition. The reaction mixture was cooled to below 20-50¡ã C. and slowly transferred to a 5-L reactor containing 1100 g of water and 1210 g of toluene. The 2-L reactor was washed with 300 g of water and the wash was combined into the 5-L reactor. The pH of the contents in the 5-L reactor was adjusted to pH 8-10 by adding approximately 1233 g (1370 mL) ammonium hydroxide (28-30percent NH3) at 20-40¡ã C. The mixture was stirred at room temperature for 15 min and the solid by-product was filtered off while the filtrate was retained. The filter cake was washed with 400 ml of toluene and the all the filtrate was combined and charged a 3-L reactor. About 500 ml of 8.5percent KOH solution was charged into the 3-L reactor and stirred for 10 min and bottom aqueous layer was spit off. A second portion of 500 ml of 8.5percent KOH solution was added and the mixture was stirred for 15 min and the bottom aqueous layer was split off. Water 500 ml was added and stirred for 15 min before the bottom aqueous layer was split off. The organic layer was heated to distill off about 100-200 ml of toluene to azeotropically remove water. A clear solution will be obtained. Typical yield 178 g real 8-bromo-5-fluoroquinoline, 75percent.Alternatively, 8-bromo-5-fluoroquinoline was prepared by adding a warm mixture containing 2-bromo-5-fluoroaniline (100 g, 1.0 eq), 4-nitrophenol (40 g, 0.54 eq), and glycerol (97 g, 2.0 eq) over 1.5 hours to sulfuric acid (267 ml) and water (114 mL) at 140-150¡ã C. The initial mixture showed 37.8percent 4-nitrophenol by relative HPLC area percent. Samples showed 4.7percent 4-nitrophenol immediately after adding 50percent of mixed starting materials and 5.0percent immediately after adding all of the materials. The yield upon workup was 87.5percent, with total impurities 0.29percent. Addition of less (0.46 eq, 34 g) 4-nitrophenol also successfully produced the intermediate of interest at acceptable yield.
If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.
Reference:
Patent; Wyeth; US2007/27160; (2007); A1;,
Bromide – Wikipedia,
bromide – Wiktionary